What did you do to your GE fit today?
and yes it was blast to drive when simple k20R was in.now its scarry fast with k24/20 combo.I am on 225/25/17 Nitto neo gens on Buddy club F91 Kuroki Rims and i can break traction when ever i want
Last edited by Fit Hybrid RS 2012; 05-18-2017 at 03:27 AM.
Yes it will fit as i have no problem with my splash scheilds as oil pan of k20 sits high in Honda Fit as our engine bay is taller(but smaller).
I had feeling the civic si k20z's and the wiring would be the easiest (not cheapest) way to do a K-swap in the fits. Since the FD2's and Fits share a good amount of the same FBW set up and how the Speedos are set up. As well as the USDM radiators are almost the same, power steering, fuel pump, exhaust manifold/ cat angle, etc...
Great vids, looks like you have fun in your car.
Well, its been decided; I'm not going to do a front sway bar. I will upgrade the bushings. I feel the factory 23mm front and the 16mm rear is a good F/R combo for street driving, with some spirited driving mixed in. If some day the fit becomes the project weekend car, then I'll finish it off with front pillow mounts, sway bar and some spherical bushings/ solid bushings. For the street and family, its perfect for me now. soooooooo, under panel here I come!
Last edited by mikes-ge; 05-18-2017 at 12:49 PM.
And a huge thank you for all the K20 info! I was gonna get the Zage kit but I realized how easy the K20r swap was lol... I owe you one bro
alright quit it. both of u. last thing u want is to rile up mike410b. he can get much worse than me and he's surprisingly holding his tongue. so before i start deleting posts and banning people, go back to topic.
Alright. Just legitimately asking a question.
Reclining seats and a roll bar/cage don't mix. The seats are made to fold/break in a crash. Which would be terrible since there's a fat metal bar waiting for your skull. Look up submarining and 4 point harnesses.
true that. simple mechanics and dynamics.
Those seats are not going to be FIA certified or something like a TUV certified. Thus wouldn't use.
Those seat belts are probably expired & four point is pretty much the worst of all worlds.
A bolt-in roll bar won't really do you any good. And becomes a safety hazard unless helmeted.
It is a bad idea. I'm honestly looking out for your safety. I am very guilty of falling for an idea without considering the potential drawbacks & would like to help prevent others from falling into those same mistakes.
@ryu, I've mellowed a fair bit over the years. Working to improve myself in the real world has hopefully translated into the web a bit too haha
Those seat belts are probably expired & four point is pretty much the worst of all worlds.
A bolt-in roll bar won't really do you any good. And becomes a safety hazard unless helmeted.
It is a bad idea. I'm honestly looking out for your safety. I am very guilty of falling for an idea without considering the potential drawbacks & would like to help prevent others from falling into those same mistakes.
@ryu, I've mellowed a fair bit over the years. Working to improve myself in the real world has hopefully translated into the web a bit too haha
I've noticed and I dont really even post here lol
Lol mike, very smooth.
Not necessarily all today but this week... I hope that is ok.
plastidiped diffuser and changed knob & boot for more sport. I also adjusted the valves then hit the front plastics and headlights with spray paint.
Not necessarily all today but this week... I hope that is ok.
plastidiped diffuser and changed knob & boot for more sport. I also adjusted the valves then hit the front plastics and headlights with spray paint.
Last edited by Kipperskipper; 05-19-2017 at 01:28 AM.
Ya i sprayed the windshield cowl aswell. I broke the damn windshield wipers and scraped the coul getting it back on. what a pain, but it was allready off for valves so whatever.
Do you know which wiper goes on the top so i dont break them again?
Do you know which wiper goes on the top so i dont break them again?