2nd Generation (GE 08-13) 2nd Generation specific talk and questions here.

What did you do to your GE fit today?

Thread Tools
 
Search this Thread
 
  #16881  
Old 03-30-2017 | 06:45 PM
counterFIT's Avatar
Banned
Joined: Jan 2015
Posts: 557
From: Raleigh, NC // Columbia, SC // Charlotte, NC
Originally Posted by connor55
Some recent pics


Damn it Connor. I need a new pair of shorts now.

I realize that I said I'd post pictures of the RS tails quite awhile back... I apologize for the delay, school has been crazy the past few weeks. These are bad phone pictures but they'll do for now, until I have access to a DSLR.






It's hard to distinguish the LEDs here, but they're LED
 
  #16882  
Old 03-30-2017 | 07:14 PM
shinjari's Avatar
Member
Joined: Dec 2015
Posts: 1,655
From: San Diego, CA
5 Year Member
Originally Posted by FKNFIT
I have tint across the top of mine , really does help makes a big difference.
Any pics? I'm leaning towards the tint on the interior and not the vinyl on the exterior.

Did they make a cut out for your rear view mirror?

Originally Posted by counterFIT
Damn it Connor. I need a new pair of shorts now.

I realize that I said I'd post pictures of the RS tails quite awhile back... I apologize for the delay, school has been crazy the past few weeks. These are bad phone pictures but they'll do for now, until I have access to a DSLR.






It's hard to distinguish the LEDs here, but they're LED
Look clean, may have to consider a change for mine....maybe I'll just tint them or something. Kinda weird that the taillights now light up on TOP compared to the BOTTOM like the USDM did. wonder why they went that route.
 
  #16883  
Old 03-30-2017 | 07:57 PM
counterFIT's Avatar
Banned
Joined: Jan 2015
Posts: 557
From: Raleigh, NC // Columbia, SC // Charlotte, NC
Originally Posted by shinjari
Look clean, may have to consider a change for mine....maybe I'll just tint them or something. Kinda weird that the taillights now light up on TOP compared to the BOTTOM like the USDM did. wonder why they went that route.
Thanks I wondered the same myself, but I like the look much better. For $160 I have absolutely no complaints.
 
  #16884  
Old 03-30-2017 | 11:39 PM
Mr.Hollow's Avatar
Member
Joined: Jul 2014
Posts: 1,083
From: CA
5 Year Member
Love the pics Connor! Congrats on getting the front end swap completed! And still being able to have the RS front badge. My only complaint about the mugen grill is I can't run the front badge anymore.
 
  #16885  
Old 03-31-2017 | 10:55 AM
steezo_'s Avatar
Member
Joined: Dec 2016
Posts: 346
From: chesapeake
5 Year Member
Originally Posted by shinjari
Great pics Connor. Steezo nice addition of the cusco front bar. Got an overall/engine bay pic of it? Have you noticed a difference?
yessssss, it pairs up nicely with the progress sway bar
 
  #16886  
Old 04-02-2017 | 06:30 AM
connor55's Avatar
Member
Joined: Apr 2012
Posts: 1,776
From: edmonton, canada
5 Year Member
Thanka guys! Im glad you like it! I love it so much compared to before. Its like a different car in person. Counterfit, im thinking of switching to the same tails as you, cause RS lol and maybe wanna switch it up after 4+ years of axis tails.

Couple more pics:




 
  #16887  
Old 04-02-2017 | 10:14 AM
Frenzal's Avatar
Member
Joined: Jun 2014
Posts: 739
From: Canada
5 Year Member
Connor,
You have one of the prettiest Fit out there!
 
  #16888  
Old 04-02-2017 | 11:08 AM
mikes-ge's Avatar
Member
Joined: Dec 2009
Posts: 167
From: Manteca CA
5 Year Member
I def like the JDM/ EDM front end. If I can find a deal on the parts I'd do it as well.
 
  #16889  
Old 04-02-2017 | 12:01 PM
steezo_'s Avatar
Member
Joined: Dec 2016
Posts: 346
From: chesapeake
5 Year Member
Ordered the jdm tails, cusco lower arm bar and this


 
  #16890  
Old 04-03-2017 | 09:49 AM
shinjari's Avatar
Member
Joined: Dec 2015
Posts: 1,655
From: San Diego, CA
5 Year Member
Originally Posted by steezo_
Ordered the jdm tails, cusco lower arm bar and this


New rear spoiler?
 
  #16891  
Old 04-03-2017 | 10:01 AM
steezo_'s Avatar
Member
Joined: Dec 2016
Posts: 346
From: chesapeake
5 Year Member
Originally Posted by shinjari
New rear spoiler?
Nope...close but on the DOWNside of the car
 
  #16892  
Old 04-03-2017 | 01:47 PM
shinjari's Avatar
Member
Joined: Dec 2015
Posts: 1,655
From: San Diego, CA
5 Year Member
You found a JDP Diffuser? They still make them?
 
  #16893  
Old 04-03-2017 | 01:52 PM
steezo_'s Avatar
Member
Joined: Dec 2016
Posts: 346
From: chesapeake
5 Year Member
Originally Posted by shinjari
You found a JDP Diffuser? They still make them?
you're good. nope, a guy on the TFC FB page was parting out his fit and he happen to have the diffuser. I snagged it up
 
  #16894  
Old 04-03-2017 | 03:16 PM
AirborneRATT's Avatar
Member
Joined: May 2010
Posts: 200
From: Bridgman, MI
5 Year Member
I replaced the stock antenna with a Toyota Matrix antenna. Not drastic but helps to keep all of the Chicago stations from bleeding into each other. I also put in a USB port using stock parts from the junk yard into my base stock radio.
 
  #16895  
Old 04-03-2017 | 04:15 PM
shinjari's Avatar
Member
Joined: Dec 2015
Posts: 1,655
From: San Diego, CA
5 Year Member
Originally Posted by steezo_
you're good. nope, a guy on the TFC FB page was parting out his fit and he happen to have the diffuser. I snagged it up
Damn....yet another reason that I should have a FB account....TFC part outs. Nice find bud. Theres a Modulo center garnish in the FS section now...was thinking of getting it...but my dipped front and rear diffusers still look good =)

But maybe I'll snag it up since I'm in talks about his cusco parts.

Originally Posted by AirborneRATT
I replaced the stock antenna with a Toyota Matrix antenna. Not drastic but helps to keep all of the Chicago stations from bleeding into each other. I also put in a USB port using stock parts from the junk yard into my base stock radio.
Any pics of this? I'm still considering the visual Garage shark fin to get rid of the RC-car looking antenna.
 
  #16896  
Old 04-03-2017 | 05:44 PM
connor55's Avatar
Member
Joined: Apr 2012
Posts: 1,776
From: edmonton, canada
5 Year Member
Shinjari, just make a FB profile only for TFC. You dont even have to use your real name haha
 
  #16897  
Old 04-03-2017 | 06:19 PM
shinjari's Avatar
Member
Joined: Dec 2015
Posts: 1,655
From: San Diego, CA
5 Year Member
Originally Posted by connor55
Shinjari, just make a FB profile only for TFC. You dont even have to use your real name haha
Connor, are you telling me to falsify information?!

MAYBE...MAYBE I'll do it...
 
  #16898  
Old 04-03-2017 | 06:20 PM
mikes-ge's Avatar
Member
Joined: Dec 2009
Posts: 167
From: Manteca CA
5 Year Member
what does TFC stand for?
 
  #16899  
Old 04-03-2017 | 06:48 PM
shinjari's Avatar
Member
Joined: Dec 2015
Posts: 1,655
From: San Diego, CA
5 Year Member
Originally Posted by mikes-ge
what does TFC stand for?
The Filipino Channel....j/k. True Fit Crew....guess the "cool" kids are part of it. I just know about it...maybe it's supposed to be like Fight Club and not talk about it...
 

Last edited by shinjari; 04-03-2017 at 07:21 PM.
  #16900  
Old 04-04-2017 | 01:18 AM
Mr.Hollow's Avatar
Member
Joined: Jul 2014
Posts: 1,083
From: CA
5 Year Member
Made and installed my rear trunk valence this weekend. Love how it turned out.

Name:  WLX5qpC.jpg
Views: 20
Size:  2.65 MB
 


Quick Reply: What did you do to your GE fit today?



All times are GMT -4. The time now is 09:25 PM.