Notices
For Sale / Want To Buy / Classified Ads for USED Fit Items Buy and Sell your USED FIT stuff here. Vendors, please do not post here. Use the "Vendor Marketplace" forum instead. MUST HAVE 20 POSTS

FS: A/T kraftwerks supercharger Kit. SOLD

Thread Tools
 
Search this Thread
 
  #1  
Old 10-06-2014 | 06:34 PM
MNfit's Avatar
Thread Starter
|
Super Moderator
iTrader: (8)
Joined: Oct 2007
Posts: 3,380
From: Minnesota
FS: A/T kraftwerks supercharger Kit. SOLD

I have been sitting on this kit for about three years now. Had it installed on my car for about 2-3 years then ended up removing it after breaking 2 belts one winter and deciding to go K swap.

Its the base Kit for the A/T 07-08 Fits. I made 112 whp with this kit. What you see in the pictures is what you get. I am pretty confident all the major components are there, I am just missing the hardware. I do know I am also missing a tool that was used for adjusting a tensioner, also there is no belt, I could send along the broken one if interested. I am asking $1,300 + $50 for shipping. I will definitely consider reasonable offers, low ballers will be ignored.

Name:  LIQwH3s.jpg
Views: 9
Size:  546.2 KB

Name:  zjCYy0U.jpg
Views: 9
Size:  543.8 KB

Name:  TNW1Suq.jpg
Views: 9
Size:  433.8 KB

Name:  NaxRlgR.jpg
Views: 9
Size:  484.2 KB
 

Last edited by MNfit; 11-11-2014 at 01:23 PM.
  #2  
Old 10-06-2014 | 10:59 PM
Hootie's Avatar
Member
iTrader: (3)
Joined: Mar 2008
Posts: 5,060
From: South of Heaven
5 Year Member
Evening bump for a good seller!
 
  #3  
Old 10-06-2014 | 11:30 PM
Rollerboots666's Avatar
Member
iTrader: (1)
Joined: Dec 2011
Posts: 1,040
From: San Diego, CA
5 Year Member
Whats the difference with the AT to MT kit? This is tempting!!!
 
  #4  
Old 10-06-2014 | 11:34 PM
Hootie's Avatar
Member
iTrader: (3)
Joined: Mar 2008
Posts: 5,060
From: South of Heaven
5 Year Member
Compressor size. A/T has C15-16 and M/T has C15-60.
 
  #5  
Old 10-07-2014 | 03:24 PM
MNfit's Avatar
Thread Starter
|
Super Moderator
iTrader: (8)
Joined: Oct 2007
Posts: 3,380
From: Minnesota
Thanks hootie! and he is right the only difference is the Compressor size, A/T having the smaller of the two. Also afternoon bump
 
  #6  
Old 10-07-2014 | 07:26 PM
jmsplitfyre's Avatar
Member
iTrader: (5)
Joined: Aug 2011
Posts: 912
From: Edmonton, AB
5 Year Member
So why isn't anyone umping on this yet? If only this was for a manual. GLWS!
 
  #7  
Old 10-08-2014 | 03:22 AM
derykisonder's Avatar
Member
Joined: Aug 2013
Posts: 336
From: Los Angeles
5 Year Member
Originally Posted by jmsplitfyre
So why isn't anyone umping on this yet? If only this was for a manual. GLWS!
You just need to change out the rotrex xD
 
  #8  
Old 10-09-2014 | 06:07 PM
Jaime Gonzo's Avatar
New Member
5 Year Member
Joined: Jun 2011
Posts: 16
From: Miami, FL
5 Year Member
Somebody buy this

I got one like this 1.5 years ago. Its awesome. Fun, reliable, and simple. Sounds great too.
 
  #9  
Old 10-14-2014 | 04:25 AM
JaySmith's Avatar
Member
Joined: Jun 2007
Posts: 587
From: Manitoba, Canada
5 Year Member
So just to clarify besides the missing hardware you`re unsure if this kit is complete? Definitely interested.
 
  #10  
Old 10-15-2014 | 06:23 AM
MNfit's Avatar
Thread Starter
|
Super Moderator
iTrader: (8)
Joined: Oct 2007
Posts: 3,380
From: Minnesota
Originally Posted by JaySmith
So just to clarify besides the missing hardware you`re unsure if this kit is complete? Definitely interested.
it doesn't have the belt (broke) and I am missing the tool that was used for adjusting the auto tenshioner. I will do some more digging in the morning to see if I can find that. Other then that and the small bits of hardware that might be needed are missing. I am confident the major components for this kit are there. An added bonus is I still have all the paper work for the install kit so that should make getting it together easier.
 
  #11  
Old 10-16-2014 | 07:19 AM
kylerwho's Avatar
spoon fed
iTrader: (11)
Joined: Apr 2008
Posts: 5,233
From: Seabattle, Washington
5 Year Member
For those that are curious, if you just run a flashpro you can use this on manuals.

the c15-16 flows a maximum 17lbs/min with a 33.6mm wheel.
the c15-60 flows a maximum 24lbs/min with a 42.6mm wheel.

For additional information see the link,
http://www.alfaclub.pl/Rotrex%20C15.pdf
 
  #12  
Old 10-21-2014 | 07:37 PM
jmsplitfyre's Avatar
Member
iTrader: (5)
Joined: Aug 2011
Posts: 912
From: Edmonton, AB
5 Year Member
Originally Posted by kylerwho
For those that are curious, if you just run a flashpro you can use this on manuals.

the c15-16 flows a maximum 17lbs/min with a 33.6mm wheel.
the c15-60 flows a maximum 24lbs/min with a 42.6mm wheel.

For additional information see the link,
http://www.alfaclub.pl/Rotrex%20C15.pdf
So this will work on a manual GD? It just won't make as much power.
If so, then I will carefully watch over this thread and hope that it would still be here when I save up enough money. Haha.

Free bump!
 

Last edited by jmsplitfyre; 10-21-2014 at 07:42 PM.
  #13  
Old 11-04-2014 | 09:45 AM
MNfit's Avatar
Thread Starter
|
Super Moderator
iTrader: (8)
Joined: Oct 2007
Posts: 3,380
From: Minnesota
Originally Posted by jmsplitfyre
So this will work on a manual GD? It just won't make as much power.
If so, then I will carefully watch over this thread and hope that it would still be here when I save up enough money. Haha.

Free bump!
yes that is correct

Tuesday Morning bump
 
  #14  
Old 11-11-2014 | 12:14 PM
jgpoirier's Avatar
Member
Joined: Mar 2012
Posts: 130
From: Calgary, AB
PMed please reply asap lol
 
  #15  
Old 11-11-2014 | 01:22 PM
MNfit's Avatar
Thread Starter
|
Super Moderator
iTrader: (8)
Joined: Oct 2007
Posts: 3,380
From: Minnesota
SOLD thank you everyone for looking
 
  #16  
Old 11-11-2014 | 04:43 PM
jgpoirier's Avatar
Member
Joined: Mar 2012
Posts: 130
From: Calgary, AB
Thanks bud, super excited for this
 
  #17  
Old 11-15-2014 | 05:36 PM
jmsplitfyre's Avatar
Member
iTrader: (5)
Joined: Aug 2011
Posts: 912
From: Edmonton, AB
5 Year Member
Originally Posted by jgpoirier
Thanks bud, super excited for this
Damn! First supercharged Fit in Alberta! We need to meet up when I go down there!
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
fooodog
For Sale / Want To Buy / Classified Ads for USED Fit Items
5
10-27-2020 01:23 PM
fooodog
Fit Engine Modifications, Motor Swaps, ECU Tuning
2
04-02-2019 02:51 PM
dustinb
For Sale / Want To Buy / Classified Ads for USED Fit Items
15
02-03-2014 03:59 AM
Lyon[Nightroad]
2nd Generation GE8 Specific For Sale/WTB Used Parts Sub-Forum
1
12-01-2010 07:02 PM




All times are GMT -4. The time now is 11:27 AM.