FS: LED products
#21
I want to get led's into my headlights but I'm not good with wiring and all that stuff
Would a first timer be able to set this up?
Would a first timer be able to set this up?
#22
Join Date: Oct 2006
Location: British Columbia
Posts: 1,920
#23
before I make any decisions could you show make a write up for me so I'm not completely clueless if I do buy these?
#26
Join Date: Oct 2006
Location: British Columbia
Posts: 1,920
I've got square LED modules with 4 LED's on them. I've got them drilled and taped to the INSIDE of the sideskirt and therefore, you can't see them.
#28
Join Date: Oct 2006
Location: British Columbia
Posts: 1,920
It's REALLY easy! You can't screw it up!
#32
Join Date: Oct 2006
Location: British Columbia
Posts: 1,920
#34
Join Date: Oct 2006
Location: British Columbia
Posts: 1,920
well, what you need to do is:
1) take off the sideskirt
2) Space out 4 LED modules evenly
3) mark where they're supposed to be
4) either - A) tape and drill them on the OUTSIDE of the sideskirt (they will then be visible)
- B) drill 4 holes where the LED's will fit on the INSIDE of the sideskirt (they will NOT be visible)
The only way i can show you is if i do another set of them or take mine off. Seeing how it's snowing like a bastard here, i won't be doing any car stuff until it starts to warm up.
The LED modules will be $12/module + shipping
#35
how much for the headlight hid kit?
#38
Join Date: Oct 2006
Location: British Columbia
Posts: 1,920
DId i do a glove box DIY??? I can't remember if i did. But yes, what you have to do is:
1) Cut the LED strip to the proper size
2) Extend the wires (power and ground)
3) Find a CONSTANT 12 volts
4) Find a SWITCHED ground
- what i did was i make a bracket that screwed into the glove box dampner. Therefore, when the box is FULLY open, the light goes on.
1) Cut the LED strip to the proper size
2) Extend the wires (power and ground)
3) Find a CONSTANT 12 volts
4) Find a SWITCHED ground
- what i did was i make a bracket that screwed into the glove box dampner. Therefore, when the box is FULLY open, the light goes on.
#40
Join Date: Oct 2006
Location: British Columbia
Posts: 1,920