General Fit Talk General Discussion on the Honda Fit/Jazz.

High Revs in the Fit

Thread Tools
 
Search this Thread
 
  #41  
Old 09-16-2011 | 05:39 AM
555sexydrive's Avatar
Member
Joined: Oct 2009
Posts: 2,317
From: ATL, Jorja
5 Year Member
Originally Posted by fitisbamf
bull ill show u the fastest reving fit, the dbw doesnt rev hang.... with straight exhaust and high flow intake my fit is super throttle responsive.... then i got a pretty nice flywheel with a decent amount of weight removed... my fit is crazy and i dont have a throttle controller... i dont believe in it sorry.
What flywheel are you running? JUN stopped producing theirs here because something was happening with the ECU and drive due to the lighter flywheel. I think J's is currently working on a replacement with another company. I've spoken with ATS/Across and they are not planning on releasing a super single setup because of the GE8 flywheel. I don't know what is so special about it.
 
  #42  
Old 09-16-2011 | 11:07 AM
fitisbamf's Avatar
Member
iTrader: (1)
Joined: Jun 2009
Posts: 718
From: san diego, ca
Originally Posted by 555sexydrive
What flywheel are you running? JUN stopped producing theirs here because something was happening with the ECU and drive due to the lighter flywheel. I think J's is currently working on a replacement with another company. I've spoken with ATS/Across and they are not planning on releasing a super single setup because of the GE8 flywheel. I don't know what is so special about it.



its stock, but i took it to a guy who makes his own engine blocks!!!


and he cut it to have a scratchy surface (i showed him my friction disc so he knew what it was grabbing on) i asked him if he could take some weight off and he said sure, there is a weighted ring on the engine side of the flywheel (the side the friction disc doesnt touch) that we removed a fair amount of as well and we removed other casting defects... the flywheel is also skinnier then stock, we cut the flywheel down pretty far to cut a decent amount of weight off. with that yes my fit responds even faster but my fit was always throttle reponsive just not "tweaker" (<- is a guy on crack) responsive till now






nothing is "special" about our flywheels just ur standard 6 bolts that hold it in... and 3 pins for allighning ur pressure plate, its just a flywheel. but i believe a gd flywheel will bolt up however u need all different clutch assembily the allighning pins for the pressure plate seem to line up differently.
 
  #43  
Old 09-17-2011 | 02:52 AM
ZaxMan's Avatar
Member
Joined: Mar 2011
Posts: 51
From: USA
I notice better take off and shift on my 2011 fit taking traction control off .
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
TommyMadison
General Fit Talk
7
03-22-2019 07:48 AM
Meobe
2nd Generation (GE 08-13)
16
01-02-2015 03:26 PM
Rook
2nd Generation (GE 08-13)
2
04-15-2012 09:41 PM
Romulus
General Fit Talk
2
09-21-2010 04:52 PM
hayden
2nd Generation (GE 08-13)
19
05-27-2010 09:10 PM



Quick Reply: High Revs in the Fit



All times are GMT -4. The time now is 12:37 PM.