The Official Blog from GD to GE to GK to GTI to R?
#9361
Join Date: Dec 2007
Location: OG Club
Posts: 20,289
you can try plastic polish or even ScratchX but make sure to use a foam pad. no terry towels as it induces too much heat. MF towels absorbs too much. need the polish on the pad surface
for small areas i use a shoe polish applicator like this kiwi one. works great.
KIWI® Foam Polish Applicators | KIWI® Products
for small areas i use a shoe polish applicator like this kiwi one. works great.
KIWI® Foam Polish Applicators | KIWI® Products
#9363
After years of messing with different plastic, paint, and even fiberglass polishing compounds, I've decided they are all basically the same thing. A liquid base with grit added to cut the material. Even metal rouge is similar. It just skips the liquid base.
I say that because, if you have a light cut paint polish around the house, it will work just fine. Just use something super mild.
If you have to buy something, Meguiars PlastX works well as does almost any other ultra fine cut cleaner/polish.
I use Plexus on the cars clear plastics (headlights, instrument panels, interior piano black/wood trim, tailights, etc) as a maintenance polish every few months. Keeps it all looking like new.
I say that because, if you have a light cut paint polish around the house, it will work just fine. Just use something super mild.
If you have to buy something, Meguiars PlastX works well as does almost any other ultra fine cut cleaner/polish.
I use Plexus on the cars clear plastics (headlights, instrument panels, interior piano black/wood trim, tailights, etc) as a maintenance polish every few months. Keeps it all looking like new.
#9365
Join Date: Dec 2007
Location: OG Club
Posts: 20,289
thanks gafit. ur info reinforces my post so this is all good!
the key is use a foam pad for polish. and just keep rubbing in a circular motion until the polish is all dry to ensure the diminishing abrasives are all broken down.
the key is use a foam pad for polish. and just keep rubbing in a circular motion until the polish is all dry to ensure the diminishing abrasives are all broken down.
#9367
Join Date: Dec 2007
Location: OG Club
Posts: 20,289
np montrealfit. keep us posted how it goes. at least since its not a painted surface u can go to town with it not having to have to worry about going through any clear coat.
#9368
Join Date: Dec 2007
Location: OG Club
Posts: 20,289
lol.. looks like dem indianadians forgot to do a weld on da ascend b pillar. free new car if urs applies! wow.
another reason why i prefer jland production like my WRX’s.
another reason why i prefer jland production like my WRX’s.
#9370
Air filter
the thread below caught my interest
I’m a newbie not a crazy car guy (yet)
the thread had info about how changing just your air filter (not ethe box) slightly increases performance torque etc
?????
I’m a newbie not a crazy car guy (yet)
the thread had info about how changing just your air filter (not ethe box) slightly increases performance torque etc
?????
Last edited by MontrealFit2012; 08-16-2018 at 04:53 PM.
#9371
I have been running cotton gauze reusable air filters since 1988. They are all a plus in my book. Possibly better fuel mileage, possibly better performance, but definitely lower cost than buying new paper filters. I put over 200k miles on a couple. Put over 150k on the one in our Fit before a mouse decided to make it part of their home.
#9372
Join Date: Dec 2007
Location: OG Club
Posts: 20,289
yah, changing filters can improve performance on some cars, but be weary that oiled filters such as K&N filters are notorious for allowing more particles through and getting gunk stuck on the sensors. i think the best filters are like ones from R2C.. havent really checked whether they make ones for our cars.
High Performance Cold Air Intakes and Performance Air Filters
they are dry filters so no worries of oil getting on the MAF sensors, throttle bodies, etc. for my GK i just use either the factory or fram filter.
on my STI, same thing, stock intake box stock filter, no plans to swap intake on my WRX either.. on my Golf-R i run https://store.034motorsport.com/x34-...-0t-gen-3.html and piggy back with much higher boost setting.
High Performance Cold Air Intakes and Performance Air Filters
they are dry filters so no worries of oil getting on the MAF sensors, throttle bodies, etc. for my GK i just use either the factory or fram filter.
on my STI, same thing, stock intake box stock filter, no plans to swap intake on my WRX either.. on my Golf-R i run https://store.034motorsport.com/x34-...-0t-gen-3.html and piggy back with much higher boost setting.
#9373
All of mine have been K&N's. Same with 4 of my car buddies that I grew up with. We've all used oiled K&N's since the late '80's. Not a single one of us have had to buy a MAF, IAT, etc sensor and we're all HIGH mileage drivers that still run them.
I think the people that have problems with oiled filters are ones that douse the things in oil. It only takes a very light spray.
Current vehicles with K&N's are our Fit (198k miles), my Lincoln (57k miles), 1990 Mustang (108k miles). Our VW will get one when time to replace the OEM filter.
That being said, nothing wrong with dry filters at all and they alleviate the concern of over oiling. I'm just a creature of habit.
I think the people that have problems with oiled filters are ones that douse the things in oil. It only takes a very light spray.
Current vehicles with K&N's are our Fit (198k miles), my Lincoln (57k miles), 1990 Mustang (108k miles). Our VW will get one when time to replace the OEM filter.
That being said, nothing wrong with dry filters at all and they alleviate the concern of over oiling. I'm just a creature of habit.
#9374
Join Date: Dec 2007
Location: OG Club
Posts: 20,289
woot, got the raceseng topology on my WRX and took it out for a test drive with my kid. VERY NICE! luv da feel of the shifter now. finally turning into my kinda car.
only thing left is tint (next week ) and cobb AP (hopefully a few months?).
kid mentioned the WRX's exhaust sounds good on da outside while i pull away, but the sound is terribly lacking inside da cabin.. i said GOOD! lol why do u think i specifically got the one with da harman kardon, son?! lol i like listening to music during my commute and loud exhausts tire me. im not so young like u kid. haha
only thing left is tint (next week ) and cobb AP (hopefully a few months?).
kid mentioned the WRX's exhaust sounds good on da outside while i pull away, but the sound is terribly lacking inside da cabin.. i said GOOD! lol why do u think i specifically got the one with da harman kardon, son?! lol i like listening to music during my commute and loud exhausts tire me. im not so young like u kid. haha
#9377
Join Date: Dec 2007
Location: OG Club
Posts: 20,289
hey there mike. i took a training course actually. paid several grand for the course plus about maybe 2-3 grand in tools. not bad, easily recovered da funds fixing people's cars within a yr just on the side. dat hail damage my GE and GK encountered was a nice pay out. i made several grand from dat ordeal from insurance and all turned into car parts. lol
#9378
Join Date: Dec 2007
Location: OG Club
Posts: 20,289
but its like learning a musical instrument. PRACTICE PRACTICE PRACTICE PRACTICE PRACTICE PRACTICE PRACTICE PRACTICE PRACTICE PRACTICE PRACTICE PRACTICE PRACTICE PRACTICE PRACTICE PRACTICE PRACTICE PRACTICE PRACTICE PRACTICE PRACTICE PRACTICE PRACTICE PRACTICE PRACTICE PRACTICE PRACTICE PRACTICE PRACTICE PRACTICE PRACTICE PRACTICE PRACTICE PRACTICE PRACTICE PRACTICE PRACTICE PRACTICE PRACTICE PRACTICE PRACTICE PRACTICE PRACTICE PRACTICE PRACTICE PRACTICE PRACTICE PRACTICE PRACTICE X1000
#9379
Join Date: Dec 2007
Location: OG Club
Posts: 20,289
considering more and more cars are coming out with aluminum panels PDR is a dying skill.. aluminum is so brittle it is extremely difficult to fix deep dents especially while not damaging the part of the door ure using as leverage. another reason why tesla repairs are so damn expensive! aluminum is a whole nother animal