General Fit Talk General Discussion on the Honda Fit/Jazz.

The Official Blog from GD to GE to GK to GTI to R?

Thread Tools
 
Search this Thread
 
  #3801  
Old 03-15-2013, 04:32 PM
kenchan's Avatar
Official Fit Blogger of FitFreak
5 Year Member
Thread Starter
iTrader: (4)
Join Date: Dec 2007
Location: OG Club
Posts: 20,289
woot doing laundry tonight...

while vac'ing the house...

so i dont have to do it on the weekend.
 
  #3802  
Old 03-15-2013, 04:40 PM
Subie's Avatar
Member
5 Year Member
Join Date: Sep 2010
Location: CA, USA
Posts: 2,334
I don't mind the stock height. I don't like crawling up and down driveways at weird angles or slowing down for every bump on the road and having to worry about messing up my paint job or leaving my oil pan behind.
 
  #3803  
Old 03-15-2013, 04:50 PM
FitStir's Avatar
Member
5 Year Member
iTrader: (1)
Join Date: May 2006
Location: NYC
Posts: 2,429
Thumbs up

Originally Posted by kenchan
....
btw, is this screw i need to take out from the cup holder area looking up, somewhat visible without killing myself?
Yeah, once you remove that cover below... but you'll need a long enough screwdriver to get to it, or socket extentions. simple... very simple.

wb ken...

doin laundry early tonite as well.... so I can watch F1 qualifying later tonite
 
  #3804  
Old 03-16-2013, 01:52 PM
kenchan's Avatar
Official Fit Blogger of FitFreak
5 Year Member
Thread Starter
iTrader: (4)
Join Date: Dec 2007
Location: OG Club
Posts: 20,289
Originally Posted by Subie
I don't mind the stock height. I don't like crawling up and down driveways at weird angles or slowing down for every bump on the road and having to worry about messing up my paint job or leaving my oil pan behind.
Yah, if you have stock wheels the car looks fine. The swifts on my car only lowers a tad so I've not had to use the weird angle approach. And stiffness isn't harsh at all.

Originally Posted by FitStir
Yeah, once you remove that cover below... but you'll need a long enough screwdriver to get to it, or socket extentions. simple... very simple.

wb ken...

doin laundry early tonite as well.... so I can watch F1 qualifying later tonite
Coool, thanks! I have a 15" screw driver so I hope I can reach it.
Yah, best to get chores done early. Have fun with F1!!
 
  #3805  
Old 03-16-2013, 01:58 PM
Subie's Avatar
Member
5 Year Member
Join Date: Sep 2010
Location: CA, USA
Posts: 2,334
I'm ok with my 17" SSR Comps 225x45s on stock height.
 
  #3806  
Old 03-16-2013, 10:21 PM
kenchan's Avatar
Official Fit Blogger of FitFreak
5 Year Member
Thread Starter
iTrader: (4)
Join Date: Dec 2007
Location: OG Club
Posts: 20,289
Originally Posted by Subie
I'm ok with my 17" SSR Comps 225x45s on stock height.
huh, what are your offsets and width?

so was playing around with my other car's 7" doubledin AVH4500BT to watch a short music dvd. hummmm... i might get another 4500BT to install in my Fit.
 
  #3807  
Old 03-16-2013, 10:29 PM
Subie's Avatar
Member
5 Year Member
Join Date: Sep 2010
Location: CA, USA
Posts: 2,334
On my Rex not the Fit... 50 offset IIRC
 
  #3808  
Old 03-17-2013, 12:23 PM
kenchan's Avatar
Official Fit Blogger of FitFreak
5 Year Member
Thread Starter
iTrader: (4)
Join Date: Dec 2007
Location: OG Club
Posts: 20,289
Originally Posted by Subie
On my Rex not the Fit... 50 offset IIRC
sounds good subie.

btw, why are you subie when you own honda's?
 
  #3809  
Old 03-17-2013, 03:26 PM
Subie's Avatar
Member
5 Year Member
Join Date: Sep 2010
Location: CA, USA
Posts: 2,334
Never really gave it much thought. Had the Subie-ru handle way before I had the Fit (1st Honda ever). Besides my Rex ('02) is still very able and willing.
 
  #3810  
Old 03-18-2013, 03:23 PM
kenchan's Avatar
Official Fit Blogger of FitFreak
5 Year Member
Thread Starter
iTrader: (4)
Join Date: Dec 2007
Location: OG Club
Posts: 20,289
Originally Posted by Subie
Never really gave it much thought. Had the Subie-ru handle way before I had the Fit (1st Honda ever). Besides my Rex ('02) is still very able and willing.
sounds good!



so it looks like f-king USPS lost my package with the wiring harnesses.
why do they suck so bad???
 
  #3811  
Old 03-18-2013, 04:15 PM
Subie's Avatar
Member
5 Year Member
Join Date: Sep 2010
Location: CA, USA
Posts: 2,334
Originally Posted by kenchan
so it looks like f-king USPS lost my package with the wiring harnesses.
why do they suck so bad???
So the next obvious question is - why didn't you go Fedex or UPS?
 
  #3812  
Old 03-18-2013, 07:04 PM
kenchan's Avatar
Official Fit Blogger of FitFreak
5 Year Member
Thread Starter
iTrader: (4)
Join Date: Dec 2007
Location: OG Club
Posts: 20,289
Originally Posted by Subie
So the next obvious question is - why didn't you go Fedex or UPS?
wish i could.... didn't have a choice as it was vendor selected free shipping. the harnesses are like $12 combined (antenna and main wires) so didnt feel likes pending $15 to overnight it on fedex.

it's still too cold outside to do the install so not in a huge rush, but i need them harnesses...
 
  #3813  
Old 03-18-2013, 07:10 PM
xxryu139xx's Avatar
Super Moderator
iTrader: (1)
Join Date: Aug 2012
Location: Union, NJ
Posts: 3,354
Originally Posted by kenchan
sounds good!



so it looks like f-king USPS lost my package with the wiring harnesses.
why do they suck so bad???
kenchan, if it makes u feel any better, FEDEX just lost my progress rsb. fedex's been lying to me since friday giving me run around after run around.
 
  #3814  
Old 03-18-2013, 08:05 PM
kenchan's Avatar
Official Fit Blogger of FitFreak
5 Year Member
Thread Starter
iTrader: (4)
Join Date: Dec 2007
Location: OG Club
Posts: 20,289
Originally Posted by xxryu139x
kenchan, if it makes u feel any better, FEDEX just lost my progress rsb. fedex's been lying to me since friday giving me run around after run around.
wow, that sucks. hope they find it for ya.

it really depends on the person handling your package for sure. like my regular mail man is cool, but when a substitute comes, he literally throws our package onto the porch. i know cause my house has ip cameras all around and it's on dvr. nothing was broken inside so didnt file a complaint, but if they did.... well, they will be hearing AND SEEING from me. lol
 
  #3815  
Old 03-19-2013, 03:59 PM
kenchan's Avatar
Official Fit Blogger of FitFreak
5 Year Member
Thread Starter
iTrader: (4)
Join Date: Dec 2007
Location: OG Club
Posts: 20,289
still no movement in the usps system...

but it does give me more time to think which HU to install.
 
  #3816  
Old 03-19-2013, 10:06 PM
kenchan's Avatar
Official Fit Blogger of FitFreak
5 Year Member
Thread Starter
iTrader: (4)
Join Date: Dec 2007
Location: OG Club
Posts: 20,289
been reading some confusing about the wiring harness between the orange and orange/white wires.

on my pioneer HU, there's only one orange/white wire for illumination. im planning on connecting this to the orange wire on the scosche wiring harness. im thinking this is correct?

still have time since the harness aint here yet! f-king usps
 
  #3817  
Old 03-22-2013, 09:24 PM
kenchan's Avatar
Official Fit Blogger of FitFreak
5 Year Member
Thread Starter
iTrader: (4)
Join Date: Dec 2007
Location: OG Club
Posts: 20,289
no harness so ordered from another store which uses UPS.
 
  #3818  
Old 03-24-2013, 07:34 PM
kenchan's Avatar
Official Fit Blogger of FitFreak
5 Year Member
Thread Starter
iTrader: (4)
Join Date: Dec 2007
Location: OG Club
Posts: 20,289
Should have the harnesses tomorrow.

Still trying to decide which HU to install.
 
  #3819  
Old 03-25-2013, 07:50 PM
kenchan's Avatar
Official Fit Blogger of FitFreak
5 Year Member
Thread Starter
iTrader: (4)
Join Date: Dec 2007
Location: OG Club
Posts: 20,289
finally gotz the harnesses. woot!

so now im down to 2 choices...both pioneers...

4500BT (same one as in my other car) - or -
850BT... i think i might do this one... hummm... not sure yet. will see later on.
 
  #3820  
Old 03-28-2013, 06:34 PM
kenchan's Avatar
Official Fit Blogger of FitFreak
5 Year Member
Thread Starter
iTrader: (4)
Join Date: Dec 2007
Location: OG Club
Posts: 20,289
wooot, washed my '12 during lunch time today.

i think im going to work on the wireharness soldering tonight. i have an extra pioneer HU harness from the new HU i recently swapped on my other car.
 


Quick Reply: The Official Blog from GD to GE to GK to GTI to R?



All times are GMT -4. The time now is 06:48 PM.