Rims&Tires&Rubbing .. oh my.
#21
The difference in distance from the hub face for a 195 tire on 39mm offset rims is half the tire section width less the offset, or 97.5 - 39 = 58.5mm. But you can't use 39 mm offset for 205 tires. Rubs.
a 195 tire on a 45 mm offset is 97.5 - 45 = 52mm. There's your 1/4" difference. Its not the wheel but the tire position that matters. The wheel and tire centerlines are set by the offset.
BTW A 205 tire on 42 yields 60.5. On 45 its 57.5. 205 on 39 is 63.5 mm and it rubs unless the tire is significantly smaller diameter than 23.4".
The blanket statement covers the widest tires on the widest known rims, aka '7', knowing anything less will fit too.
a 195 tire on a 45 mm offset is 97.5 - 45 = 52mm. There's your 1/4" difference. Its not the wheel but the tire position that matters. The wheel and tire centerlines are set by the offset.
BTW A 205 tire on 42 yields 60.5. On 45 its 57.5. 205 on 39 is 63.5 mm and it rubs unless the tire is significantly smaller diameter than 23.4".
The blanket statement covers the widest tires on the widest known rims, aka '7', knowing anything less will fit too.
Ok i see what your saying, but i think it would be very close to fitting with a 205, the tire type also has a play in it with how wide or square the tread blocks are etc. With camber i think a 205 would be fine.
About that lip like others said, NO WAY would that fit.
Thread
Thread Starter
Forum
Replies
Last Post