Front Cusco tower bar owners, please chime in
#1
Join Date: Dec 2007
Location: OG Club
Posts: 20,289
Front Cusco tower bar owners, please chime in
I bought the Cusco tower bar and installed it on my 08Fit Sport
last week.
In the instructions it states that on the 1.5L i need to move around
some harness over the motor to prevent contact with the bar.
(it's in Japanese).
anyway, i didn't have any clearance issues with my bar so did not
go through this procedure.
ive driven the car over 200miles now and no irratic noises or any
thing like that....
does the motor rock so much that it hits the bar or something
shifting at wot?
last week.
In the instructions it states that on the 1.5L i need to move around
some harness over the motor to prevent contact with the bar.
(it's in Japanese).
anyway, i didn't have any clearance issues with my bar so did not
go through this procedure.
ive driven the car over 200miles now and no irratic noises or any
thing like that....
does the motor rock so much that it hits the bar or something
shifting at wot?
#4
no don't worry it does not. I have seen the cusco bar in person on my friends fit and it doesn't hit at all. The jdm intake manifold is a little different then ours so the harness sits a little higher.
#5
Join Date: Dec 2007
Location: OG Club
Posts: 20,289
thanks, koolkevin! that's wat i thought. that's very good to know.
#8
Join Date: Dec 2007
Location: OG Club
Posts: 20,289
guys, thanks again.
btw, if you didn't use loctite on your mounting screws (4), check
your torque. mine backed out twice using 25lbs. went up to about
35lbs and it's been solid.
btw, if you didn't use loctite on your mounting screws (4), check
your torque. mine backed out twice using 25lbs. went up to about
35lbs and it's been solid.
Thread
Thread Starter
Forum
Replies
Last Post
F'it_ImFromTx
Fit Suspension & Brake Modifications
27
08-25-2008 12:43 AM