Tanabe Gf210s photos, questions, answers
#63
Never heard or thought of that as a factor since I'll be driving mine alone 90% of the time. Makes alot of sense though!!!
#65
They are exactly the same size as the stock one on the car. Usually a camber bolt will have a small hump right above the threads so when you rotate the bolt it will move the hub for +/- camber.
#66
then where can we get some??
#67
I'd like to know as well... but seeing as how i just got an alignment, i dont see any point in dumping another 20-30 bucks into bolts then another 50 on the alignment for another -.5 - -1 degree more camber
David
David
#68
I'm sure if you could find someone to sorce the JDM front strut mount bolts & nuts ...since they are smaller in DIA. vice the USDM ones you could use them for setting more camber in the front...??? give me a day or two and I'll see if I can post the part # for you guys
#69
Below is straight out of Honda's Interactive Network, the part# is probably correct but wrong part in the wrong package, happens all the time. I will check my service manual tomorrow and see what it says. If those bolts are not on your car, I would return them and just tell the parts deparment what happened, I'm positive they can verify that Honda made a mistake.
#70
Below is straight out of Honda's Interactive Network, the part# is probably correct but wrong part in the wrong package, happens all the time. I will check my service manual tomorrow and see what it says. If those bolts are not on your car, I would return them and just tell the parts deparment what happened, I'm positive they can verify that Honda made a mistake.
-David
#74
hi
is there any difference between JDM and USDM fitting for the Tanabe Lowering springs?? cos i wanna change from NF210 to DF210, i have a JDM 2004 Honda Jazz and im currently on my Tanabe NF from Japan,
will i have fitting issues if i get Tanabe USDM and put em on my JDM Jazz
is there any difference between JDM and USDM fitting for the Tanabe Lowering springs?? cos i wanna change from NF210 to DF210, i have a JDM 2004 Honda Jazz and im currently on my Tanabe NF from Japan,
will i have fitting issues if i get Tanabe USDM and put em on my JDM Jazz
#76
Some are "eccentrics" which would have the small-hump; so when you rotate it, it'll change cam/caster...
Which one do you need?
#77
where to buy tanabe springs??
hey all, first post here. im getting my fit next week(BOM) and i cant wait. but im new to these forums and i dont really know where to get parts(i drove a scion tC before which got totaled). can someone please tell me where i can get the tanabe springs? both the GF and the DF?? thanks in advance.
#78
#80
Tanabe DF210 on Fit Sport anyone???
planning on getting these for my ride when it comes in next week. but the only pics ive seen here are not on sport models. wanted to see how the front lip stood off the ground. pictures would be appreciated as well as feedback. thanks in advance.