kenmei's 07 Fit Sport -- Transformation
#41
it came a little banged up, so i decided to plastidip it. it's basically a rubberized membrane you can peel off if you ever choose to do so. but its flat black..so i've been thinking if i can throw a clear coat on it or something
#42
^ Ditto. Thats a good way of explaining what it is.
More than likely, you've seen it a few times and never knew what it was. If you ever had a pair of pliers, the strange rubbery like material on the handles are plastidip.
More than likely, you've seen it a few times and never knew what it was. If you ever had a pair of pliers, the strange rubbery like material on the handles are plastidip.
#43
Hey just read over this thread again. Good progress so far. Noticed you do not have progress rear sway bar yet. Let me say buy this before any strut bars. This is by far one of the best things you can do. Even on stock suspension you will definitely feel this bar. After that do strut bars. Fittin has one on his f/s thread you were looking at j's bar. Buy this first. Anybody else could chime in here and say the same thing.
#44
Hey just read over this thread again. Good progress so far. Noticed you do not have progress rear sway bar yet. Let me say buy this before any strut bars. This is by far one of the best things you can do. Even on stock suspension you will definitely feel this bar. After that do strut bars. Fittin has one on his f/s thread you were looking at j's bar. Buy this first. Anybody else could chime in here and say the same thing.
#45
went over ryanroland's place today to install my mugen replica rs bumper that i painted with plastidip.
ryan helped a bunch and i think we did an awesome job.. liking the look, way better than a sport model fit with a base (removed sport lip) bumper
Before shots for comparison:
what do you guys think??
ryan helped a bunch and i think we did an awesome job.. liking the look, way better than a sport model fit with a base (removed sport lip) bumper
Before shots for comparison:
what do you guys think??
Last edited by kenmei; 01-17-2011 at 03:01 PM.
#47
Nice work, but not sure I like it either. Paint it I think would look better? All in all though its what you like that matters. So thats a mugen replica. How is fitament against bumper, any gaps? Like the lip. When I get home tonight off mobile site ill look at it on pc with bigger screen. Droid pics are small.
#49
Nice guess thats how it should be done. Ive been trying but people neg me for very stupid reasons like starting a thread in two different spots and stuff. So ill try hard to keep it clean.
#50
Nice work, but not sure I like it either. Paint it I think would look better? All in all though its what you like that matters. So thats a mugen replica. How is fitament against bumper, any gaps? Like the lip. When I get home tonight off mobile site ill look at it on pc with bigger screen. Droid pics are small.
fit was pretty good. it's snug in all the places it should be (everywhere it touches the bumper).
i can't complain for $88....
#51
updating....
Planned upgrades:
RS style front lip - installed
Tanabe Touring Medallion Exhaust - waiting to arrive
CF door sil overlays - installed
CF rear hatch overlay - installed but removed... thinking of garnish options
Random cool looking decals - put on (SOHC Vtec, SPORT and I <3 my GD3)
CF cowl hood scoop - waiting to be made
Tanabe or similar front/rear sway bars
Red H Emblems
Lowering Springs (thinking Swift or Skunk2)
CF Engine Cover
T1R CF intake (currently running K&N Drop in)
-If you have any of the above that's not ordered for sale, PM me!
Planned DIY's:
Vertical rear wiper mod - finished
Gas pedal spring mod - finished
Fog light housing paint (black) - finished
Independent Fog lights
Yellow Fog light overlays
Planned upgrades:
RS style front lip - installed
Tanabe Touring Medallion Exhaust - waiting to arrive
CF door sil overlays - installed
CF rear hatch overlay - installed but removed... thinking of garnish options
Random cool looking decals - put on (SOHC Vtec, SPORT and I <3 my GD3)
CF cowl hood scoop - waiting to be made
Tanabe or similar front/rear sway bars
Red H Emblems
Lowering Springs (thinking Swift or Skunk2)
CF Engine Cover
T1R CF intake (currently running K&N Drop in)
-If you have any of the above that's not ordered for sale, PM me!
Planned DIY's:
Vertical rear wiper mod - finished
Gas pedal spring mod - finished
Fog light housing paint (black) - finished
Independent Fog lights
Yellow Fog light overlays
#53
Ordered my JDM Red H's and a red steering wheel H from DecalDude
Ordered yellow vinyl overlays from azncarbos
can't wait to put them on!
...still waiting for the tanabe exhaust i ordered from im the fit. almost been 1month since i paid for it. not overly happy at this point
Ordered yellow vinyl overlays from azncarbos
can't wait to put them on!
...still waiting for the tanabe exhaust i ordered from im the fit. almost been 1month since i paid for it. not overly happy at this point
#54
Ordered Today:
3in Carbon Fiber Antenna
Carbon Fiber Cowl Scoop - Rogue Fit is awesome!
BOM Spray Paint + Primer + Clear (for Mugen Replica Bumper)
Trim Black Spray Paint (for rear hatch garnish and fog lights)
T1R Carbon Fiber Intake -- finalizing deal via PM
gosh, so much to do...so little time!
3in Carbon Fiber Antenna
Carbon Fiber Cowl Scoop - Rogue Fit is awesome!
BOM Spray Paint + Primer + Clear (for Mugen Replica Bumper)
Trim Black Spray Paint (for rear hatch garnish and fog lights)
T1R Carbon Fiber Intake -- finalizing deal via PM
gosh, so much to do...so little time!
#56
installed LED dome light and trunk light from atticusfit!
dome:
trunk:
also, removed my muffler (seen in 2nd pic) ... loving the sound! very deep and not ricey at all. once you hit vtec you can really hear the k&n intake whistle too...i like it a lot! i figured i'd keep it this way until my tanabe medallion arrives, then it'll be an easy install
start up video:
YouTube - honda fit muffler delete -- startup
video while driving:
YouTube - IMG 0398
dome:
trunk:
also, removed my muffler (seen in 2nd pic) ... loving the sound! very deep and not ricey at all. once you hit vtec you can really hear the k&n intake whistle too...i like it a lot! i figured i'd keep it this way until my tanabe medallion arrives, then it'll be an easy install
start up video:
YouTube - honda fit muffler delete -- startup
video while driving:
YouTube - IMG 0398
#59
yeah i post in both, this thread is more of my blog so i can keep uptodate with my mods and get opinions on future plans
#60
updating project list....
Planned upgrades:
Mugen RS style front lip - installed
Tanabe Touring Medallion Exhaust - waiting to arrive
CF door sil overlays - installed
Random cool looking decals - put on (SOHC Vtec, SPORT and I <3 my GD3)
CF cowl hood scoop - installed
CF 3inch shorty antenna - installed
Red H Emblems - waiting to receive
Lowering Springs (thinking Swift or Skunk2) - put in an offer
Tanabe or similar front/rear sway bars - Want To Buy
CF rear hatch garnish - Want To Buy
CF Engine Cover - Want To Buy
T1R CF intake (currently running K&N Drop in) - Want To Buy
8000k HIDs - Want To Buy
-If you have any of the above that's not ordered for sale, PM me!
Planned DIY's:
Vertical rear wiper mod - finished
Gas pedal spring mod - finished
LED Dome & Trunk lighting - finished
Fog light housing paint (black) - waiting for paint
Independent Fog lights
Yellow Fog light overlays - received but not installed
Planned upgrades:
Mugen RS style front lip - installed
Tanabe Touring Medallion Exhaust - waiting to arrive
CF door sil overlays - installed
Random cool looking decals - put on (SOHC Vtec, SPORT and I <3 my GD3)
CF cowl hood scoop - installed
CF 3inch shorty antenna - installed
Red H Emblems - waiting to receive
Lowering Springs (thinking Swift or Skunk2) - put in an offer
Tanabe or similar front/rear sway bars - Want To Buy
CF rear hatch garnish - Want To Buy
CF Engine Cover - Want To Buy
T1R CF intake (currently running K&N Drop in) - Want To Buy
8000k HIDs - Want To Buy
-If you have any of the above that's not ordered for sale, PM me!
Planned DIY's:
Vertical rear wiper mod - finished
Gas pedal spring mod - finished
LED Dome & Trunk lighting - finished
Fog light housing paint (black) - waiting for paint
Independent Fog lights
Yellow Fog light overlays - received but not installed