My 09 GE Taffy is all nice and shiny again
#41
My winkers. Finally saw them at night. Surprising how can be seen from side/rear. Same with the JDM tails
Enjoy the short video.
YouTube - 001.MOV
Enjoy the short video.
YouTube - 001.MOV
cool I like it. May just have to add this mod to my list
#42
Installed the TC yesterday. Gave her a wash and then went to test the TC on SP7.
While out took some pics.
I am just about done with Mods.... well until the next one comes along
While out took some pics.
I am just about done with Mods.... well until the next one comes along
#43
How do you like the Zeta Hood Deflector? I think they add to the appearance look well-made too. Do they seem effective at protecting the hood at all?
Oh and, did you have to remove some of the molding under the hood to install the clips? Or did Zeta change the need for that procedure?
How did you mount that Throttle Controller above the steering column? Great place for it, btw.
I forget, what are you dropped on? It looks about right for me and my tastes. Not to mention, any lower than that for me and I would probably bottom out just leaving/entering my driveway. (huge dip at end of driveway)
Your baby's looking really good, B3sr! Now, how 'bout that next mod?
Thanks for pics and info!
#45
Annunc8 - Thanks for comments
1 - hood deflector I got when I bought the car. So from Canadian dealer. Not sure how it is mounted? It seems to work OK. I don't know if I would get one again or not. Been playing with idea of black vinyl hood wrap which would do same thing. I do have a couple of tiny chips on the hood I have touched up.
2- dropped on Swifts. One of my favorite mods. It just feels better in corners even though I likely do not come close to limits. They manage to make it look better without a serious drop. Should be nice with my slightly large snow tires.
3- the TC is stuck on there with the double sided tape that came with it. I am behaving and leaving it in ECO4. My Wife was not impressed. In the pic it looks good but the ends are raised. The plastic shroud could be cut to recess it some and still allow you to toggle. I t would be nice if the LED in it were blue to match the dash. Hmm a mod maybe
K.C. -
1 - Darn I do not know where I got the trim kit on Ebay. You are the first to comment on it. I think it along with the Clazzios really give the interior a touch of class. I am surprised more do not use it. I have not seen another Freak with one.
2 _ I took the wife out for ice cream last evening. An excuse to have her try out the raised seat. She liked it. Now I must try the seatbelt widing.
Oh future mods??? Well I have since painted my winter steelies TW. Raised the front of the seats and I have the Dudes i-VTEC/SOHC decals in black for the sides.
Wheels in future? Nope not seeing any that I like much better than the stock sports. Maybe after I see how I like the winter whites I may paint them TW.
1 - hood deflector I got when I bought the car. So from Canadian dealer. Not sure how it is mounted? It seems to work OK. I don't know if I would get one again or not. Been playing with idea of black vinyl hood wrap which would do same thing. I do have a couple of tiny chips on the hood I have touched up.
2- dropped on Swifts. One of my favorite mods. It just feels better in corners even though I likely do not come close to limits. They manage to make it look better without a serious drop. Should be nice with my slightly large snow tires.
3- the TC is stuck on there with the double sided tape that came with it. I am behaving and leaving it in ECO4. My Wife was not impressed. In the pic it looks good but the ends are raised. The plastic shroud could be cut to recess it some and still allow you to toggle. I t would be nice if the LED in it were blue to match the dash. Hmm a mod maybe
K.C. -
1 - Darn I do not know where I got the trim kit on Ebay. You are the first to comment on it. I think it along with the Clazzios really give the interior a touch of class. I am surprised more do not use it. I have not seen another Freak with one.
2 _ I took the wife out for ice cream last evening. An excuse to have her try out the raised seat. She liked it. Now I must try the seatbelt widing.
Oh future mods??? Well I have since painted my winter steelies TW. Raised the front of the seats and I have the Dudes i-VTEC/SOHC decals in black for the sides.
Wheels in future? Nope not seeing any that I like much better than the stock sports. Maybe after I see how I like the winter whites I may paint them TW.
#47
Thanks Wily. You must work on that Avatar.
#52
Hey, no problem. Give credit where credit's due, I always say. Texas (alias- GottaGetThatCoiffureTogether,Bro' ) Coyote is correct... elegant ride!
You're the second person I've read a post from who said they either "Raised the front of their seats, or raised their front seats." Do you mean you actually raised your front seat? If so, how did you do it? Instructions, materials used? If there's a post describing, sorry... it must have escaped me. I've been too busy to even visit the forum much for quite awhile now.
The problem I have with the Fit's drivers seat is there is no tilt control. My SUV has every possible seat adjustment available. I miss the tilt, and it is a little too low for me overall... no matter how I adjust.
If you have a solution for raising the seat, please help me with a small clue.
Thanks, B3sr.
You're the second person I've read a post from who said they either "Raised the front of their seats, or raised their front seats." Do you mean you actually raised your front seat? If so, how did you do it? Instructions, materials used? If there's a post describing, sorry... it must have escaped me. I've been too busy to even visit the forum much for quite awhile now.
The problem I have with the Fit's drivers seat is there is no tilt control. My SUV has every possible seat adjustment available. I miss the tilt, and it is a little too low for me overall... no matter how I adjust.
If you have a solution for raising the seat, please help me with a small clue.
Thanks, B3sr.
#54
Actually I wear a pith helmet or straw hat for protection from the sun and either a beret or skimmer when I drive with my windows lowered.... My wife wears a bucket hat with mosquito net for her daily walk in the woods with the dog...
#55
Where can I get that GPS mount. I don't lke having mine on the windsheild and don't like the look of the bean bag style.
Thanks
#56
Hey, no problem. Give credit where credit's due, I always say. Texas (alias- GottaGetThatCoiffureTogether,Bro' ) Coyote is correct... elegant ride!
>>> Well thank you
You're the second person I've read a post from who said they either "Raised the front of their seats, or raised their front seats." Do you mean you actually raised your front seat? If so, how did you do it? Instructions, materials used? If there's a post describing, sorry... it must have escaped me. I've been too busy to even visit the forum much for quite awhile now.
The problem I have with the Fit's drivers seat is there is no tilt control. My SUV has every possible seat adjustment available. I miss the tilt, and it is a little too low for me overall... no matter how I adjust.
If you have a solution for raising the seat, please help me with a small clue.
Thanks, B3sr.
>>> Well thank you
You're the second person I've read a post from who said they either "Raised the front of their seats, or raised their front seats." Do you mean you actually raised your front seat? If so, how did you do it? Instructions, materials used? If there's a post describing, sorry... it must have escaped me. I've been too busy to even visit the forum much for quite awhile now.
The problem I have with the Fit's drivers seat is there is no tilt control. My SUV has every possible seat adjustment available. I miss the tilt, and it is a little too low for me overall... no matter how I adjust.
If you have a solution for raising the seat, please help me with a small clue.
Thanks, B3sr.
Really super sharp Fit!!!!
Where can I get that GPS mount. I don't lke having mine on the windsheild and don't like the look of the bean bag style.
>>> The mount came with my Garmin. I had to glue the base to dash with Super Glue I think it was as the adhesive tape would not hold.
Thanks
Where can I get that GPS mount. I don't lke having mine on the windsheild and don't like the look of the bean bag style.
>>> The mount came with my Garmin. I had to glue the base to dash with Super Glue I think it was as the adhesive tape would not hold.
Thanks
#57
Thanks for the compliment but I really can't take full credit, someone on the forum figured it out a while back and I simply remembered it - I congratulate myself for remembering. It is a nice mod for the front seats, however.
#59
Lol... I read on another forum (not a Fit forum) about some guy who placed long, cylindrical spacers and extended bolts under his seat in order to raise it. Apparently it didn't work... eventually the bolts bent, the spacers shifted to the side, the seat kinda' moved toward the console in the front and toward the door in the rear! It just kinda' twisted unevenly and out of position.
He must have either been doing some serious left-hand turning in order for that to happen, or the spacers were ridiculously long.
Thanks for the "washer fix."