sidemarkers anyone? (lots of shots)
#1
sidemarkers anyone? (lots of shots)
sup guys, i did my side markers last week but ive been so bus that i haven't had the time to post them, but now that i have the time here they are.
the master cutting was done by jap 07 fit here on the forum
:if any one in florida wants there side markers done on any fit or rsx let us know we well be more then happy to do them:
the master cutting was done by jap 07 fit here on the forum
:if any one in florida wants there side markers done on any fit or rsx let us know we well be more then happy to do them:
#4
i sourced the side markers of a local seller but you can get them from jdmland.com or passwordjdm.com with the harness and all we made are own harness. total time to do took about 45 min - and hour .
:chris yes you do have to cut that much off the fend for the clip to fit.
if you or any one wants a stenil let me know and out got out and measure the dimension and post them on here .
as for the wheels they are wed sports sa90's 15'
:chris yes you do have to cut that much off the fend for the clip to fit.
if you or any one wants a stenil let me know and out got out and measure the dimension and post them on here .
as for the wheels they are wed sports sa90's 15'
#5
Looks pretty sweet, plus adds to the car's safety factor which is always a big bonus in my books.
Is it LED, where does it tie into the existing signal system?
I installed a s-marker kit when I had my Isuzu, you basically drilled two small holes and it tightened up on that. Worked well, but the outside housing broke on me a few months later
Is it LED, where does it tie into the existing signal system?
I installed a s-marker kit when I had my Isuzu, you basically drilled two small holes and it tightened up on that. Worked well, but the outside housing broke on me a few months later
#16
I just moved down here from Maine and didn't bring much in the way of tools so I don't have the means to do this, plus cutting into brand new shiny painted sheet metal makes me nervous
You guys did a good job with the cuts and it looks pretty clean. PM me and maybe hopefully we can work something out?