Hey all I had a greddy informeter (OBD2 Scanner) in my last car and figured today what the heck lets plug it in. For whatever reason it is not reading anything. It gets power off the OBD2 and turns on but states communication failed. Anyone try a similar tool and have an issue? Please let me know I'm going to email greddy as well.

 

I dont think it's gonna work cuz it's not made for the fit??!!

 

ill have to agree with this guy..

 

It is made for any OBD2(1996+ USDM) car. The fit has an obd port you can feel it under the drivers dash to the right hand side. The fit has to be OBD2 for emissions compliance (so it can be plugged in for smog).

 

Well I just got off the phone with Greddy and they told me they have issues with other cars such as the RX8 and it is not unlikely there is an issue with the fit despite the fact that it is OBD2. THey told me to check back next week or so. that thing is cool I hope they fix it.

 

just because the greddy piece is obd2 compliant doesnt mean itll work. a lot of newer cars use different software and scanners cant read it.

 

I was under the impression the basics all still had to work however such as O2 sensors speed and rpm... ah well we shall see.

 

i have an inexspensive obd2 scan tool i use for my s2k but it wont work on some newer cars. i tried it on an 06 or 07 chevy pickup and nada.

 

i tried my Techtom obd2 reader (from my 99 accord) and it didn't work either

-joe

 

Thanks for the info...

 

Haha I just wish I didn't have to put this up on ebay. This unit is actualy really cool. Color display and a ton of OBD2 params read.

 

The Informeter works in the Fit in Japan, the Australian Jazz (both Japanese and Thai manufactured) and the Thai Jazz. You may want to contact Greddy in Japan as they may be more knowledgeable about getting it to work since they have had the Fit for the last 5 years.

 

Really. Just call trust Co? Do they have english speaking personel? I know 0 japanese and don't know anyone who speaks it fluently.

 

troof man japanese ppl r lazy to lear other than japanese lol

 

I don't think there is too much they can do... unless maybe the pins are in different positions and I have to rip apart the harness? Do the honda service manuals show the pinouts on the OBD2 port?

 

Wondered what that was, thanks

Hope someone comes back with something working on this later.

 

we might be too lazy to learn english too :-)

the obd port is the same, it's just the communication protocol that is different for the newer (2005+) hondas.. my mechanic has the same issue with his snap-on scanner, need to put it into obd2 only mode instead of honda mode

-joe

 

Actually, I think English is part of their standard curriculum in middle school(?). It's just that they don't learn it very well since they don't have the environment to use it correctly.