turbo kit development update. 8/6/08
#22
well i'm partially joking on selling anything. i'd still like to build a kit for myself some day. but at the same time if someone threw me a decent offer on some things i'd probably let them go. here's a rundown of what i have.
GT28r turbo
3 fit engine flanges and t25 flanges
downpipe flange for gt28r
2.5" aluminum piping
GReddy type S bov
22x8x2.5" bar and plate intercooler
RC 310cc injectors
AEM FI/C ignition fuel ignition computer
and misc hoses, silicon couplers, and clamps.
GT28r turbo
3 fit engine flanges and t25 flanges
downpipe flange for gt28r
2.5" aluminum piping
GReddy type S bov
22x8x2.5" bar and plate intercooler
RC 310cc injectors
AEM FI/C ignition fuel ignition computer
and misc hoses, silicon couplers, and clamps.
#24
well i'm partially joking on selling anything. i'd still like to build a kit for myself some day. but at the same time if someone threw me a decent offer on some things i'd probably let them go. here's a rundown of what i have.
GT28r turbo
3 fit engine flanges and t25 flanges
downpipe flange for gt28r
2.5" aluminum piping
GReddy type S bov
22x8x2.5" bar and plate intercooler
RC 310cc injectors
AEM FI/C ignition fuel ignition computer
and misc hoses, silicon couplers, and clamps.
GT28r turbo
3 fit engine flanges and t25 flanges
downpipe flange for gt28r
2.5" aluminum piping
GReddy type S bov
22x8x2.5" bar and plate intercooler
RC 310cc injectors
AEM FI/C ignition fuel ignition computer
and misc hoses, silicon couplers, and clamps.
#27
well i'm partially joking on selling anything. i'd still like to build a kit for myself some day. but at the same time if someone threw me a decent offer on some things i'd probably let them go. here's a rundown of what i have.
GT28r turbo
3 fit engine flanges and t25 flanges
downpipe flange for gt28r
2.5" aluminum piping
GReddy type S bov
22x8x2.5" bar and plate intercooler
RC 310cc injectors
AEM FI/C ignition fuel ignition computer
and misc hoses, silicon couplers, and clamps.
GT28r turbo
3 fit engine flanges and t25 flanges
downpipe flange for gt28r
2.5" aluminum piping
GReddy type S bov
22x8x2.5" bar and plate intercooler
RC 310cc injectors
AEM FI/C ignition fuel ignition computer
and misc hoses, silicon couplers, and clamps.
#37
wow such harsh words. lol realistically all I need is oil feed/return lines and fittings to finish it. but the major hiccup is this is the only running vehicle I own. and i'm not brave enough to tear into it witout another mode of transportation. I actually own a da integra thats pretty much ready to roll. just have to wire in the obd1 dizzy and fire it up. but that requires time/motivation which both are low on the charts right now. don't get me wrong i'd love to boost the fit, but the big thing I don't have money for which I feel is the most important thing....... tuning! I could probably get by doing it myself (which i've done in the past) but i'd feel a million times better flying my buddy down to tune it and do it on a dyno. so yeah thats easily $500+ which is far worth it IMO. but we'll see I just sold one of my sets of wheels so that would pay for tuning. but i'm still undecided.
Last edited by underdog; 01-05-2009 at 11:09 PM.
#38
dude, you know you want to, just do it. you can just tune it yourself and whenever you have money you can fly out your tuner! wait, tuning a car isn't that hard just have someone close to you tune it, it's not like your tuner is the only guy that can tune a car properly... well go look at my thread for some motivation lol!
#39
dude, you know you want to, just do it. you can just tune it yourself and whenever you have money you can fly out your tuner! wait, tuning a car isn't that hard just have someone close to you tune it, it's not like your tuner is the only guy that can tune a car properly... well go look at my thread for some motivation lol!