3m paint protection film, xpel, clearbra, etc?
#141
Quik question
I want to get a "Bra" for the front of my Fit Sport. I looked into a Clear bra but there out of my price range right now(got quoted at 600$). I was wondering where i can get just a standard black Bra for the front of a Fit Sport? Can i get one from my Honda dealer? All help is appreciated!
#147
They go for 103 NIB here,,,,
Honda Parts Super Store - Honda Accessories, Honda Parts Authorized Dealer
thanks but no thanks
Honda Parts Super Store - Honda Accessories, Honda Parts Authorized Dealer
thanks but no thanks
#148
That's what I have and without copy and pasting it all over again here's the post on it I made just the other day. https://www.fitfreak.net/forums/106591-post13.html
Oops, that's the post from last December but there is a post I did just the other day here somewhere. Too many reposts of the same questions. Try the search function to find it. Come to think of it I may be thinking of that thread after all but I know I put a lot more info about it in one of the threads.
Oops, that's the post from last December but there is a post I did just the other day here somewhere. Too many reposts of the same questions. Try the search function to find it. Come to think of it I may be thinking of that thread after all but I know I put a lot more info about it in one of the threads.
i tried to contact that seller if they have a pattern for a Fit Sport since i think they were only listing a pattern for the Base Fit. I tried contacting them 3 times and got no replies. I wonder what customer service would be if you got problems with the film. anyway, anybody out there that could point me to an affordable protection film? tnx
#149
Their customer service is decent. They would not refund my money until I mailed them back the item they sent me, but I had trashed it already because I couldnt get it to fit properly. They did send me a return label to ship it back.
The clear bra was about 3 inches too short on BOTH sides. I did not use a heatgun or anything though, so it may have been my mistake. I just dont see how it would have fit, but again I am not a clearbra pro installer. You can always give it a shot for $25 and return it if it doesnt fit.
The clear bra was about 3 inches too short on BOTH sides. I did not use a heatgun or anything though, so it may have been my mistake. I just dont see how it would have fit, but again I am not a clearbra pro installer. You can always give it a shot for $25 and return it if it doesnt fit.
#150
i contacted them again and this time i used the email they posted on the listing instead of the built in ebay message feature. here's the pattern that they were selling
it looks like it was designed for a Base fit (lip not included). Notice that the grille part also looks like it was the aftermarket sport grille.
i think that 3 inches short on both sides is way off unless the right way to install it is to stretch it.
it looks like it was designed for a Base fit (lip not included). Notice that the grille part also looks like it was the aftermarket sport grille.
i think that 3 inches short on both sides is way off unless the right way to install it is to stretch it.
#151
i contacted them again and this time i used the email they posted on the listing instead of the built in ebay message feature. here's the pattern that they were selling
it looks like it was designed for a Base fit (lip not included). Notice that the grille part also looks like it was the aftermarket sport grille.
i think that 3 inches short on both sides is way off unless the right way to install it is to stretch it.
it looks like it was designed for a Base fit (lip not included). Notice that the grille part also looks like it was the aftermarket sport grille.
i think that 3 inches short on both sides is way off unless the right way to install it is to stretch it.
No that's not for the aftermarket grill, it actually fits the bumper right above the "H" emblem below the hood.
I still think they're using a pattern for a Jazz and not the USDM Fit which is why it comes up short.
I don't have their email address in my address book anymore but it was Nicole that I spoke with back when I got mine.
If they don't have the pattern for the sport by now then I guess they don't want our business enough for us to give them our money.
In that case I would suggest just getting some in bulk and having it installed by a tint shop. You can find some films at a decent price here eBay Store - VehicleFilms: Window Tint Film 2 Ply Metal, Window Tint Film 1 Ply but I have no idea as to the quality of their film. I don't see the 3M film on eBay anymore.
Shop around and see what other options there are now.
#152
I want to get a "Bra" for the front of my Fit Sport. I looked into a Clear bra but there out of my price range right now(got quoted at 600$). I was wondering where i can get just a standard black Bra for the front of a Fit Sport? Can i get one from my Honda dealer? All help is appreciated!
I got a complete pre-cut kit for the front Sport model for about 50$. My only problem is finding someone competent to install it
#153
Regarding Clear Film, try this: Xtremecity@aol.com
I got a complete pre-cut kit for the front Sport model for about 50$. My only problem is finding someone competent to install it
I got a complete pre-cut kit for the front Sport model for about 50$. My only problem is finding someone competent to install it
#154
I bought a kit from this same vendor back around last November, along with the installation DVD. The weather was so cool then that I figured that installation would be impossible, and decided to wait until summer. I'll bet that my kit won't fit my Sport Fit.
#155
If it's like mine it wont fit right but the hood and fender pieces fit good. It's just the bumper that comes up short. Start from the middle and heat it up real good. Get ready to do a whole lot of pulling to stretch it as far as you can. Problem is then your fingers dig in and deform it... It's a bit of a challange. Good luck.
#156
Yes it gets stretched during the install but that's the pattern for the base model by looking at it there's no pieces for the fog light trims as well as the sport trim as you pointed out. It looks like they fixed the mirror pieces and the piece that goes around the "H" emblem but it's hard to tell in that pic.
No that's not for the aftermarket grill, it actually fits the bumper right above the "H" emblem below the hood.
I still think they're using a pattern for a Jazz and not the USDM Fit which is why it comes up short.
I don't have their email address in my address book anymore but it was Nicole that I spoke with back when I got mine.
If they don't have the pattern for the sport by now then I guess they don't want our business enough for us to give them our money.
In that case I would suggest just getting some in bulk and having it installed by a tint shop. You can find some films at a decent price here eBay Store - VehicleFilms: Window Tint Film 2 Ply Metal, Window Tint Film 1 Ply but I have no idea as to the quality of their film. I don't see the 3M film on eBay anymore.
Shop around and see what other options there are now.
No that's not for the aftermarket grill, it actually fits the bumper right above the "H" emblem below the hood.
I still think they're using a pattern for a Jazz and not the USDM Fit which is why it comes up short.
I don't have their email address in my address book anymore but it was Nicole that I spoke with back when I got mine.
If they don't have the pattern for the sport by now then I guess they don't want our business enough for us to give them our money.
In that case I would suggest just getting some in bulk and having it installed by a tint shop. You can find some films at a decent price here eBay Store - VehicleFilms: Window Tint Film 2 Ply Metal, Window Tint Film 1 Ply but I have no idea as to the quality of their film. I don't see the 3M film on eBay anymore.
Shop around and see what other options there are now.
I might plan to buy the uncut version and try to install it myself just out of curiosity. I like these kind of challenges. two people working to stretch it I think is better than heat gun alone.
#157
The bumper is definitely a two man job if you have to stretch it by pulling. I did the install on my own and I had the front bumper piece somewhat on the bumper and I slowly started lining things up. This is when I realized there was no way I could fit it and I tried trimming areas so it would fit properly. Eventually, I gave up and junked the kit. I spent about 2 hours trying to put the clear bra on there!
#158
If it's like mine it wont fit right but the hood and fender pieces fit good. It's just the bumper that comes up short. Start from the middle and heat it up real good. Get ready to do a whole lot of pulling to stretch it as far as you can. Problem is then your fingers dig in and deform it... It's a bit of a challange. Good luck.
Having installed the Canadian hood deflector, I don't need any more protection there, but it is the bumper where I was hoping that the clear bra would pay off. Oh well, maybe I will find an installer and pay through the nose for professional installation on the bumper. At least I didn't lose much on the eBay purchase. Thanks for the heads up.
#160
since you have first hand experience installing this yourself, i have a few questions for you: does the film shrink or does it stretch when you use a heat gun/hair dryer on it? is it similar to a window tint where there is also a liner that you have to peel off? if there is a liner, is it easy to tell which side to put on the car?
I might plan to buy the uncut version and try to install it myself just out of curiosity. I like these kind of challenges. two people working to stretch it I think is better than heat gun alone.
I might plan to buy the uncut version and try to install it myself just out of curiosity. I like these kind of challenges. two people working to stretch it I think is better than heat gun alone.
It's a lot like window tint just a whole lot thicker. Yes there is a backing that you peel off and that is the side that goes against the car. Since you want the plastic film on the car and not the paper backing it's pretty easy to tell which side to put on the car (the plastic film not the paper)...lol.
Originally Posted by manxman
Thanks 2hot-
Having installed the Canadian hood deflector, I don't need any more protection there, but it is the bumper where I was hoping that the clear bra would pay off. Oh well, maybe I will find an installer and pay through the nose for professional installation on the bumper. At least I didn't lose much on the eBay purchase. Thanks for the heads up.
Having installed the Canadian hood deflector, I don't need any more protection there, but it is the bumper where I was hoping that the clear bra would pay off. Oh well, maybe I will find an installer and pay through the nose for professional installation on the bumper. At least I didn't lose much on the eBay purchase. Thanks for the heads up.
When I got mine they sent me their pattern and I told them where to make adjustments to it so it would fit right. I don't know if they ever did anything with the info I gave them but if they did it should fit. Only way to find out is for someone to try installing the pattern as it is now.
Mines been on for a year now and in another year or 2 I'll be replacing it. Next time I'll go with the 3M and have it installed on the bumper. I'll do the hood myself with some 8 mil. and I'll do the fenders myself since they are easy.
I may even get a wild hair and buy some 8 mil. in a bulk roll and make something to stretch it from tire to tire and try installing it that way.
I have some ideas of how to do it but it would get lost in the process of trying to explain it but basically wrap the ends around a bar that's mounted to a platform that the tires sit on to keep it tight. Still playing with ideas of ways to do it anyway.