What's New With Your Fit?
#362
11-28-2009 | 03:05 PM
Added, OEM cargo tray. Weather-tech front floor mats. Home made rear mats. Wide angle small side mirrors. OEM rear bumper protector thing. Am working up the courage to install Fog lite protector's and condenser protection.
#367
12-04-2009 | 01:10 PM
Member
Joined: Dec 2009
Posts: 69
From: Westminster, CA
People fill in their mounts with polyurethane when the mount breaks as a cheaper alternative to buying brand new mounts, It helps a little, but generally speaking it just creates more rattles and is only a temp fix. I've heard of people using window weld as a cheaper alternative to polyurethane. On good condition mounts it is suppose to help with engine movement when launching. Energy Suspension makes motor mount inserts for most cars which do a similar job, but the problem is they only do it for certain mounts on the car.
Personally in my experience filling the mounts will snap in a week if you put down enough power.
Personally in my experience filling the mounts will snap in a week if you put down enough power.
#369
12-07-2009 | 01:21 PM
People fill in their mounts with polyurethane when the mount breaks as a cheaper alternative to buying brand new mounts, It helps a little, but generally speaking it just creates more rattles and is only a temp fix. I've heard of people using window weld as a cheaper alternative to polyurethane. On good condition mounts it is suppose to help with engine movement when launching. Energy Suspension makes motor mount inserts for most cars which do a similar job, but the problem is they only do it for certain mounts on the car.
Personally in my experience filling the mounts will snap in a week if you put down enough power.
Personally in my experience filling the mounts will snap in a week if you put down enough power.
#370
12-07-2009 | 01:58 PM
thanks for that post thejroisgo, backyard innovation FTW! i have the same 1st to 2nd and poopoo wheel hop problem and was told that an ETD and poly mounts would help. maybe i'll save some cash and try this first.
#371
12-07-2009 | 05:14 PM
^No prob, let me know if you really wanna do it, I've got the urethane gun and some extra tips. Just order 2 of these 3M Scotch-Weld DP601NS Urethane Adhesive
make sure you get the 50ml syringe. I'll come up and give you a hand, just buy me lunch and we'll be set.
make sure you get the 50ml syringe. I'll come up and give you a hand, just buy me lunch and we'll be set.
#374
12-21-2009 | 06:26 PM
i sold my pro-c's and i'm on eibach sportlines and oem shocks now. NIGHT and DAY difference! i miss the flat as a board handling but i am enjoying the more comfortable ride on the sportlines.
t1r s-spec dampers and a progress rear sway bar are next, probably sometime in late january.
t1r s-spec dampers and a progress rear sway bar are next, probably sometime in late january.
#375
12-22-2009 | 08:34 PM
Pick those baby last month..... and only paid $20 
Nice Charlie!
I though you has the rear sway bar already.....
Well I pick up layer of Dirty like Mike too ( well maybe more then a layer)
but replace I had to replace two on bolt on the wheel..... one was stripped and the other crack...
i sold my pro-c's and i'm on eibach sportlines and oem shocks now. NIGHT and DAY difference! i miss the flat as a board handling but i am enjoying the more comfortable ride on the sportlines.
t1r s-spec dampers and a progress rear sway bar are next, probably sometime in late january.
t1r s-spec dampers and a progress rear sway bar are next, probably sometime in late january.
I though you has the rear sway bar already.....
Well I pick up layer of Dirty like Mike too ( well maybe more then a layer)
but replace I had to replace two on bolt on the wheel..... one was stripped and the other crack...
... i'll just buy the progress one and paint it white lol jk
#380
12-23-2009 | 10:16 AM
at the greddy garage sale they had.. i had to take it to them after the install the harness was wrong. but they got everything working good now.