wrench meet? :)
#321
08-28-2008 | 09:43 PM
does anyone know how to roll fenders??
My wheels rub in dips (offset 32 i think??) and only have gf210's. I will be installing Ksports and will lower it way more and would like to keep rubbing to a minimal.
My wheels rub in dips (offset 32 i think??) and only have gf210's. I will be installing Ksports and will lower it way more and would like to keep rubbing to a minimal.
#323
08-28-2008 | 10:08 PM
you guys know i have the dremmel, some tools, knowledge and a little brawn... but not too much, haha. Also, i will go pick up some costco pizza if everybody pitches in for lunch, i will also bring some brew and a bit of soda. BAD ASS. Im excited.
#325
08-28-2008 | 11:18 PM
mm yes Garden Grove Cosco and Ceasar Ceasar are both pretty close to my house so we will do a vote then or something, and Gimme! I have Gorilla Ramps if we need them, but dropped fits wont go up unless you remove your bumpers or something, because my mom's 330i BARELY makes it. But if you want, bring yours for safe measuring! I also have jackstands but i dunno if both are the same length...
Also does anymore have a camcorder so we can do some group-moving shots later? haha
and a good quality camera would be nice for during the installs
Also does anymore have a camcorder so we can do some group-moving shots later? haha
and a good quality camera would be nice for during the installs
#327
08-28-2008 | 11:27 PM
mm yes Garden Grove Cosco and Ceasar Ceasar are both pretty close to my house so we will do a vote then or something, and Gimme! I have Gorilla Ramps if we need them, but dropped fits wont go up unless you remove your bumpers or something, because my mom's 330i BARELY makes it. But if you want, bring yours for safe measuring! I also have jackstands but i dunno if both are the same length...
Also does anymore have a camcorder so we can do some group-moving shots later? haha and a good quality camera would be nice for during the installs
Also does anymore have a camcorder so we can do some group-moving shots later? haha
and a good quality camera would be nice for during the installsLast edited by saiko; 08-28-2008 at 11:29 PM.
#328
08-28-2008 | 11:28 PM
mm yes Garden Grove Cosco and Ceasar Ceasar are both pretty close to my house so we will do a vote then or something, and Gimme! I have Gorilla Ramps if we need them, but dropped fits wont go up unless you remove your bumpers or something, because my mom's 330i BARELY makes it. But if you want, bring yours for safe measuring! I also have jackstands but i dunno if both are the same length...
Also does anymore have a camcorder so we can do some group-moving shots later? haha and a good quality camera would be nice for during the installs
Also does anymore have a camcorder so we can do some group-moving shots later? haha
and a good quality camera would be nice for during the installsWrenches
Soldering Iron
Electric Tape
Copper Wire
Solder
Extension cord
Maybe Floor Jack
My Mid-Pipe... If I install it by then
#329
08-28-2008 | 11:36 PM
okay, i will list what i will bring again just to get it out of my head so i can see it
Jack
JAck Stands (2 sets)
Misc. Tools
Cordless drill
Ramps (just incase)
Air Compressor
Air Impact
EZ-UP 12x12 (if anyone will want to use it(first come first serve bitches
...at least after my side markers are done)
Cooler. i will bring some sodas since i know not all like beer.
Also, if there is anyone else rolling out from the land of the dirt people, we could probably play "follow the leader, he's in a honda" to the block. Somewhere off the 91 in Corona would be cool.
Jack
JAck Stands (2 sets)
Misc. Tools
Cordless drill
Ramps (just incase)
Air Compressor
Air Impact
EZ-UP 12x12 (if anyone will want to use it(first come first serve bitches
...at least after my side markers are done)Cooler. i will bring some sodas since i know not all like beer.
Also, if there is anyone else rolling out from the land of the dirt people, we could probably play "follow the leader, he's in a honda" to the block. Somewhere off the 91 in Corona would be cool.
#330
08-28-2008 | 11:59 PM
Yess i'll be walking out with a fixed bumper, Mugen wannabe Visors, and Black headlights! Hey i had an idea, what if i paint only part of the foglights? like only the outer part and leave a little blue ring inside, the part near the lenses or paint that part black and leave the outer part blue? hmmmmmmmm
#332
08-29-2008 | 01:22 AM
i'm scheduled for work that day 
but maybe i'll call in sick, this is gonna be huge.
if i end up going, should a bring them? we could test fit them on your car, and if you like them i'll sell 'em to you for 600.00.
but maybe i'll call in sick, this is gonna be huge.if i end up going, should a bring them? we could test fit them on your car, and if you like them i'll sell 'em to you for 600.00.
#333
08-29-2008 | 04:33 AM
I barely have enough for sidemarkers! Sorry man. That's a mad good price for 17s 
Anyways... I might be able to bring 2 jack stands and a floor jack too if needed. Also I'm totally down for bringing some Dr. Pepper. Mmm<3
Last edited by goodyonsen; 08-29-2008 at 04:38 AM.
#335
08-29-2008 | 06:13 PM
Member
Joined: Apr 2008
Posts: 160
From: Montrose, CA
I would love to be there for the wrench meet. I've got 25 years worth of tools, jacks, jack stands, compressor, impact, etc. I'm also going to buy Junior40er's old GF210 springs.
Unfortunately, September 6th is my 6th wedding anniversary. If I want to have a 7th anniversary, I had better skip the meet. Dang it!
--Barry
Unfortunately, September 6th is my 6th wedding anniversary. If I want to have a 7th anniversary, I had better skip the meet. Dang it!
--Barry
#336
08-29-2008 | 06:18 PM
I would love to be there for the wrench meet. I've got 25 years worth of tools, jacks, jack stands, compressor, impact, etc. I'm also going to buy Junior40er's old GF210 springs.
Unfortunately, September 6th is my 6th wedding anniversary. If I want to have a 7th anniversary, I had better skip the meet. Dang it!
--Barry
Unfortunately, September 6th is my 6th wedding anniversary. If I want to have a 7th anniversary, I had better skip the meet. Dang it!
--Barry
#338
08-29-2008 | 10:51 PM
Member
Joined: Feb 2008
Posts: 236
From: Rowland Heights
I would love to be there for the wrench meet. I've got 25 years worth of tools, jacks, jack stands, compressor, impact, etc. I'm also going to buy Junior40er's old GF210 springs.
Unfortunately, September 6th is my 6th wedding anniversary. If I want to have a 7th anniversary, I had better skip the meet. Dang it!
--Barry
Unfortunately, September 6th is my 6th wedding anniversary. If I want to have a 7th anniversary, I had better skip the meet. Dang it!
--Barry
