Action Jackson's tinkering
#202
Morel Hybrid 63 and generic speaker pods
Cut and trimming away of A Pillar. In crash videos, the air bag deploys at nearly the top portion.
Plastic welding of stainless steel mesh
Plastic welding to the A pillar. The mesh will provide more natural flow and curve lines
Filler is combo of scrap A pillar plastic and Fibre Flex universal plastic weld
Rough test fit. The alignment wasn't what I was originally after but in the end, it worked out well.
Speakers added in for preliminary sound test.
To be continued.....
Cut and trimming away of A Pillar. In crash videos, the air bag deploys at nearly the top portion.
Plastic welding of stainless steel mesh
Plastic welding to the A pillar. The mesh will provide more natural flow and curve lines
Filler is combo of scrap A pillar plastic and Fibre Flex universal plastic weld
Rough test fit. The alignment wasn't what I was originally after but in the end, it worked out well.
Speakers added in for preliminary sound test.
To be continued.....
Last edited by Action Jackson; 07-07-2022 at 07:51 AM.
#205
After 7 years and finally getting the car setup the way that I wanted. Some dipshit decides to make a left turn in an intersection while I was almost in the middle with the right of way.
Well it was a slice.
Onto better things.
Well it was a slice.
Onto better things.
#206
Sorry to hear bro. From the looks of it, it seems easily repairable (no frame damage etc).
But these days with most parts being unavailable with no ETA available, I can see the reason they totaled it off.
I'm sure I'm not the only one who appreciates all you've contributed to this forum
But these days with most parts being unavailable with no ETA available, I can see the reason they totaled it off.
I'm sure I'm not the only one who appreciates all you've contributed to this forum
#209
After 7 years and finally getting the car setup the way that I wanted. Some dipshit decides to make a left turn in an intersection while I was almost in the middle with the right of way.
Did the Fit's air-bags inflate?
Fair market value is probably more than $10,000. US. $10,000 to replace the bumper cover, pull ouot or weld on new body parts, bang out any small bumps in the hood, replace both headlight assemblies with Made In China (MiCH) assemblies. Replace parking light assemblies.
So – I can't tell for sure but I don't see any damage to the hood. Minor damage can be bumped out. I can't tell if the windshield has any cracks in it. The urethane rubbery bumper cover looks like it is rather well-smashed. You can probably get an MICH aftermarket replacement for much less than a genuine Honda one, Maybe for roughly about $100 US instead of $300. And MICH headlight assemblies, too. What's the Radiator like? Suspension parts? if suspension parts aren't damaged I'd bet someone will "un-total" it and put it back on the road, possibly in central america
Thread
Thread Starter
Forum
Replies
Last Post
mdbrich
For Sale / Want To Buy / Classified Ads for USED Fit Items
3
05-22-2010 07:06 PM