MODS/ACCESSORIES for the GK
#1221
I imagine it'd be very different since the wheel base on the GK changed from the GE. The GK also got shorter.
#1222
The motor sounds a bit coarse from the inside of the car but pretty fun to drive. Wish there isn't a by law, here in Vancouver Canada, against front windows being tinted.
Last edited by Cyphor; 10-05-2015 at 10:32 PM.
#1228
I picked up a paint pen at the local auto parts store for a few bucks. It doesn't stay on all that great.
Wheels are 16 X 7 42 et w/ 5mm spacers in back only; 205/50/16 Bridgestone RE760. -1.7 camber front, -1.6 camber rear.
Wheels are 16 X 7 42 et w/ 5mm spacers in back only; 205/50/16 Bridgestone RE760. -1.7 camber front, -1.6 camber rear.
#1229
My front and rear garnish pieces came today, and I got the rear installed tonight. Not being a "read the instructions" guy, I dove right in and discovered you don't need to remove the plastic panel from the inside of the hatch, as the two screws that hold the outside edges of the garnish are in plain sight, and then the piece just pops right out with a tape-wrapped flat-blade screwdriver. I swapped the four clips unique to the EX+ trim over to the new trim, and had it all back together in less than 15 minutes.
es
es
#1232
It's the OEM trim piece for the LX. I also have the LX front grill (no chrome strip), but have yet to pull the front end apart to install it.
I don't remember exactly where I ordered it, here's one source (link).
es
I don't remember exactly where I ordered it, here's one source (link).
es
#1236
#1237
That height looks perfect. I wish I had the extra $1200 to spend on coil overs right now.