Volk CE28N
#1
Volk CE28N
I have my heart set on some CE28N 10 spoke wheels. My question is will they mount on our Fit since they only come in 5X100 bolt pattern? Also, which offset would you guys recommend for me if I'm lowered on Swift springs, 48 mm or can I get by with 42 mm without rubbing? I plan to get the 16X7 wheels and use 205/45 tires. Any input is appreciated!
#2
You won't be able to use the 10 spoke version with the stock hubs. I suppose you could get an adapter if there are any to convert 4x100 to 5x100, but that will push the wheels out further so wouldn't want to go lower than +48 as +45 already is flush in a 6.5" wheel up front without any camber and you will need to run camber as I'm sure the least width adapter you will find would be no less than 15mm.
Might be time to look at their 8 spoke version or just different wheels altogether.
Might be time to look at their 8 spoke version or just different wheels altogether.
#3
Dang, I really like the look of the 10 spoke much better then the 8 spoke. Ok, thought I found the perfect wheels, guess I'm back to square one now. Thanks for the info. Any recommendations of something similar you can suggest?
#4
RE30s in 16x6.5 +45 or 16x7 +42 Brand new outside your budget with the $uck, but might be able to find used through Mike.
I understand about the 8 and 10 spoke design, I too prefer the 10 over the 8, but the 8 looks good as well, I have some 15x7 8 spokes for circuit use.
I understand about the 8 and 10 spoke design, I too prefer the 10 over the 8, but the 8 looks good as well, I have some 15x7 8 spokes for circuit use.
Thread
Thread Starter
Forum
Replies
Last Post
vwaudimb
2nd Generation GE8 Specific Wheel & Tire Sub-Forum
12
05-24-2011 02:02 PM