Mod List
Engine:
Mugen oil cap
Greddy Ti-C Axle back exhaust
T1R B-pipe
Takeda Cold Air Intake
Denso IK22 Spark plugs
KTuner OBD Reflash unit

Exterior :
JDP Engineering CF Front Lip
JDP Engineering Vented CF Hood
JDP Engineering Duckbill CF spoiler
JDM Tail lights
LS460 Retrofit projector headlights
OEM Window Visors

Interior :
Driver Side Bride Zeta III XL
BRIDE Zeta III XL Seat Rail XL
Works Bell Hub
Works Bell Quick Release
Momo Monte Carlo 350mm Steering Wheel(daily)
Mugen Racing III Steering Wheel
Mugen mirror cover
Battlecraft x Chronicles Hyper Teardrop shift knob
Hybrid Racing short shifter
Mugen pedals
Mugen floor mats

Suspension / brakes / wheels:
Volk TE37SL 15x8 +35
Bridgestone Potenza RE71R

SSR Type C 16x6.5 +32
Firestone Firehawk Indy 500

Muteki SR48 Lug nuts
Redshift Motorsports Koni/Ground Control Coilovers
400lb front/450lb rear Springs
Spoon Front Sway Bar
Progress Rear Sway Bar
Cusco front strut bar
Cusco rear strut bar
Cusco lower subframe brace
SPC Camber Bolts
Wilwood DPHA Calipers
Goodridge stainless braided Brake lines
ATE Brake Fluid
__________________________________________________
Original post -----------------------------------------------------------------

So this happened:
1/7/2007 - 6/6/2013 - 2007 SSM Fit Sport Auto =[ @144285 miles



So after a LONG week driving a rental car Mazda 3 sedan, I went and got this:
6/16/2013 - 2013 CBP Fit Sport Manual


6/17/2013:
Tint 35 Rear windows/glass
can barely tell lol


also ordered:
Redshift Koni Coilovers
Tanabe Touring Medallion axle back
PRM intake
Revo technica short shifter
OEM visors, all weather floor mats, cargo tray

6/19/2013:
Exhaust is delivered. Go amazon prime.





6/20/2013:
Short shifter installed and shift knob from my old GSR
Skunk2 10th anniversary shift knob lol


6/24/2013:
PRM intake delivered and installed

6/26/2013:
OEM Accessories delivered and installed.


6/27/2013: Rear sway bar delivered.

6/30/2013:
Ordered RPF1s and tires.

7/9/2013:
Rims/tires put on.


7/18/2013:
Redshift coilovers finally delivered and installed!
Camber bolts and RSB also installed. BIG thanks to DoYouFit?, konig_feather, martamus, and TPColgett for all the help!
Teaser pic until I can get some nice pics of the height.


7/20/2013:
Alignment today. -3 camber up front.

Rpf1 16x7 +35
yokohama s.drives 205/50/16

949Racing 6UL 15x7.5 +42
BFG Rivals 225/45/15

8/1/13:
Waiting to be installed:
softer rear springs for daily driving - 275 lb/in

Waiting to buy:
stiffer rear springs for autox - 672 lb/in

Waiting to ship:
h-fit short shifter/hard mounts
t1r b-pipe
cusco 2pt and 4pt braces
spoon front sway bar

Shipped:
skunk2 short shifter

08/06/13:
Short shifters came in. failed at any combination of the 3 i have.

08/15/13:
So... The revo technica short shifter works with the h-fit adapter and skunk2 mounts(h-fit hard mounts would be the same since the revo technica already has hard mounts.) Right now I have the revo technica ss, h-fit adapter, skunk2 spacers, bolts from hardware store. The center console just barely fits over it and the cup holders don't fully snap into place. But the shift is pretty darn short.

Still waiting to ship:
T1r b pipe
Spoon fsb

Still waiting to be installed:
Cusco braces
Softer daily rear springs (waiting to get some stiffer autox springs.)

Still have a list of things I want to buy:
Flashpro for the love of GOD Hondata!
JDP stuff
Retrofit headlights
Bucket seat???

Then I'll be done.... Probably.

09/03/2013:
Quick update
Got one of the 2 cusco braces on. Also added jdm red front and rear Honda badges. And some jdm rs tails.



In the mail:
Retrofit headlights
Greddy SE axle back (arrived today. may update later.)

Still waiting to ship:
T1r b pipe
Spoon fsb

Still have a list of things I want to buy:
Flashpro for the love of GOD Hondata!
JDP stuff
Bucket seat

first dyno day with takeda cai and t1r b pipe/greddy axle back


2nd dyno day with added t1r header/pcd and secondary cat delete and street tune with ktuner. first pull was done with no tune (112whp). then 3 pulls on the street tune. i actually went back to the shop a couple weeks later for another dyno day and pulled 116 again.


after cam and valvetrain install. was the tuners first time seeing/using ktuner software.


Sprintex SC with ktuner. Stock motor.

Feel free to comment lol. Figured i'd have a progess thread this time around.

 

That is what you call a Fit fan. Get the new car and jump right in doing mods. Going to be nice when you get done.

 

LOL! You've installed more mods in 2 weeks, than I did in 2 years!

 

Hell yea that's what I'm talkin bout...glad u didn't get seriously hurt in the accident. Is the revo short shifter a ebay item? And how is it?

 

That's the plan lol.



Yeah it's a Mugen copy I think. Feels fine to me but bear in mind I've only had it on about two weeks. I couldn't tell you about it's longevity. Shifts are a bit notchy but I've heard that's what all the short shifter that replace the entire assembly are like. There's a thread on here about it I think.

 

sorry and congrats!!!

 

Need to lowerrrrrrrr!! Come on redshift!!!!

 

more pics coming soon with the drop! gotta wash this mofo. black gets dirty stupid quick

 

Congratz on your new whip

 

Thanks guys

 

 

Love your new fit! I was just in an accident Friday and it crumpled. I really don't want it totaled. Does anyone know if the front crumples, will it be wrecked?

 

Solid stuff going on in this thread. How do you like the prm intake? It's cross my mind to pick one up but the gains don't really seem like they're worth it.

 

depends on value of the car and how much damage...

 

I honestly couldnt tell you the difference between prm and stock since I installed it before break-in was done. Sounds amazing though. Had a PRM intake on my GD and I had no complaints then either.

 

My best time at autox yesterday.

 

small update to first post. about a 1 1/2 months into ownership. nearing 5k miles.

i think i want a new shift knob. any suggestions/reviews?

 

Good choice in wheels, I was going to get 949 for my EK, but got the rpf1 wrapped in yokohoma s drives instead. I might try them on my fit just to see how they'd look lol! Pic below for reference:

 

do ittttt!!!

 

Small updates. I should post pics soon