little intro
#41
Join Date: May 2010
Location: alhambra, monterey park, CA
Posts: 327
i just took some pics of the lights (right b4 it started to rain)
here is just driving light switched on (parking + ccfl angeleyes + led strip + signal)
the new signal (switch back led bulb...requires custom socket modding)
cclf angeleye + parking 5smd led t10 bulb
further back pic
projectors on
passenger
driver
cutoff (im parked at an angle)
vid of the switchback
here is just driving light switched on (parking + ccfl angeleyes + led strip + signal)
the new signal (switch back led bulb...requires custom socket modding)
cclf angeleye + parking 5smd led t10 bulb
further back pic
projectors on
passenger
driver
cutoff (im parked at an angle)
vid of the switchback
Last edited by ohanahuichubbz; 12-30-2010 at 01:13 AM.
#42
I'm thinking your getting those 2 large reflection above the cutoff because you still have reflectors in your housings and some of the HID light is bouncing off them. Since your hosing is black maybe you should paint the relectors for the big bulb black aswell. You will get a cleaner light output
#44
Is this what you used for the HID projectors? Been searching for a bit and haven't found exactly what your using...
Replacement HID Light Bulbs For HID Xenon Conversion Kit
Replacement HID Light Bulbs For HID Xenon Conversion Kit
#45
Join Date: May 2010
Location: alhambra, monterey park, CA
Posts: 327
no, those are not the ones i used..ive actually upgraded my projectors to tsx lens and blacked out the reflectors so my set has changed dramatically but i havent had the time to take pictures and update my thread.
you actually got to the right place tho because they did my retrofit for me. if you are looking for a nice set up, you can give them a call or email and they will let you know more about the options you have go with.
you actually got to the right place tho because they did my retrofit for me. if you are looking for a nice set up, you can give them a call or email and they will let you know more about the options you have go with.
#46
Join Date: May 2010
Location: alhambra, monterey park, CA
Posts: 327
I finally got some time to take a few snap shots of my new tsx projector setup. It's pretty much all blacked out except for the shroud and turn signal reflector. Here they are... Let me know what y'all think
here's a close up of my led angel eye
Here's another of my custom switchback 2-tone turn signal
Here's one from afar...don't mind the base bumper. It's temp cuz my buddy borrowed my sport
here's a close up of my led angel eye
Here's another of my custom switchback 2-tone turn signal
Here's one from afar...don't mind the base bumper. It's temp cuz my buddy borrowed my sport
#49
Join Date: May 2010
Location: alhambra, monterey park, CA
Posts: 327
Black housing and tsx projector w/o led halo upgrade is 550 with led halo upgrade is extra 150 that's everything including parts and labor backed with 1yr warranty on ballast and 6months on bulb. (hid kit included).
They actually moved to 2115 Troy in el Monte. If u end up going look for Henry. He'll hook u up and mention fitfreak.
They actually moved to 2115 Troy in el Monte. If u end up going look for Henry. He'll hook u up and mention fitfreak.
Thread
Thread Starter
Forum
Replies
Last Post