DIY Turn Signal Mirrors (winkers)
#63
hi im very curious about ur seat covers.. where did you get them and were they expensive? can you show me the way to aquire them thanx
#65
Hi Dave. I got my switch and the repair wires. Im ready to attempt my installation. Any updates for us?
#66
If the colors don't match, I think you can have it painted. I was told that some Honda dealers accept painting jobs for accessories these. This way, you can get the colors as close as the originals.
By the way, does anyone know if white LEDs are available for the turn signal lights (instead of the usual orange color)?
Thanks!
Chip of Honda Fit Factory
By the way, does anyone know if white LEDs are available for the turn signal lights (instead of the usual orange color)?
Thanks!
Chip of Honda Fit Factory
#67
Amazing!
Great DIY! I was looking at these mirrors last night from the same seller on eBay and was wondering what the instal would be like. Your are my savior! haha
How hard is it to remove the sport wing? Anyone know? I am looking to replace it with a Mugen Carbon one.
How hard is it to remove the sport wing? Anyone know? I am looking to replace it with a Mugen Carbon one.
#68
I'll update this thread soon
#70
now we can locate the blue and white wires that Dave let us
know about.
thanks Dave
look at the pics. white is at the top blue is at the bottom.
Blue is left +
white is right +
the negatives i put together.
then i bolted them to the hood release bracket.
now we can hook up the positive blue and white.
like so.
know about.
thanks Dave
look at the pics. white is at the top blue is at the bottom.
Blue is left +
white is right +
the negatives i put together.
then i bolted them to the hood release bracket.
now we can hook up the positive blue and white.
like so.
hi nooooB question here, and im planning to attempt this install
my one question how do i tell which yellow wire from the harness is +/- or does it not matter?
i understand what i quoted but im just curious when i extend the yellow wires which should be + and which should be -.
Last edited by tdubl; 05-26-2009 at 08:55 PM.
#71
Join Date: Aug 2008
Location: Palm Coast FLA
Posts: 1,929
hi nooooB question here, and im planning to attempt this install
my one question how do i tell which yellow wire from the harness is +/- or does it not matter?
i understand what i quoted but im just curious when i extend the yellow wires which should be + and which should be -.
my one question how do i tell which yellow wire from the harness is +/- or does it not matter?
i understand what i quoted but im just curious when i extend the yellow wires which should be + and which should be -.
i'll tell you the best way to tell. get yourself a 9 volt battery and try both
ways. only one way will work. the light will light up. then you will find out which is which.
then i used a black marker to mark my - negative. so later when you get
into the install you have no more trouble.
#72
i'll tell you the best way to tell. get yourself a 9 volt battery and try both
ways. only one way will work. the light will light up. then you will find out which is which.
then i used a black marker to mark my - negative. so later when you get
into the install you have no more trouble.
ways. only one way will work. the light will light up. then you will find out which is which.
then i used a black marker to mark my - negative. so later when you get
into the install you have no more trouble.
#73
i'll tell you the best way to tell. get yourself a 9 volt battery and try both
ways. only one way will work. the light will light up. then you will find out which is which.
then i used a black marker to mark my - negative. so later when you get
into the install you have no more trouble.
ways. only one way will work. the light will light up. then you will find out which is which.
then i used a black marker to mark my - negative. so later when you get
into the install you have no more trouble.
i was gonna do that but didnt have a 9v and was using a AA batt lol thank you again!
#74
Join Date: Aug 2008
Location: Palm Coast FLA
Posts: 1,929
so we can all see.
no prob
#75
[quote=niko3257;662823]common now. lets get them in this weekend and post up some pics
so we can all see.
Believe me I'm dying to get them on, but Im waiting for Dave's contribution so I can get mine to fold too. Im sure Dave will get that info to us soon.
so we can all see.
Believe me I'm dying to get them on, but Im waiting for Dave's contribution so I can get mine to fold too. Im sure Dave will get that info to us soon.
#76
Join Date: Aug 2008
Location: Palm Coast FLA
Posts: 1,929
[QUOTE=aenokea;662829]
oh thats right you have the folding option. lucky bastards
do you at least have them mounted on the car?
that would be half the battle.
just extend all the wires and mark them.
then leave them under the dash till your ready.
cause man i can tell you getting all that wire you got through
that rubber tube. good luck. that was a pain in the ass.
i wish you luck.
can't wait to see them working
Dave ... calling Dave. hello
oh thats right you have the folding option. lucky bastards
do you at least have them mounted on the car?
that would be half the battle.
just extend all the wires and mark them.
then leave them under the dash till your ready.
cause man i can tell you getting all that wire you got through
that rubber tube. good luck. that was a pain in the ass.
i wish you luck.
can't wait to see them working
Dave ... calling Dave. hello
Last edited by niko3257; 10-01-2009 at 12:33 AM.