2nd Generation (GE 08-13) 2nd Generation specific talk and questions here.

2009 - 2012 vs. 2013

Thread Tools
 
Search this Thread
 
  #1  
Old 06-22-2013 | 11:00 AM
kaptivesmoke's Avatar
Thread Starter
|
Member
Joined: Jun 2013
Posts: 28
From: Austin, TX
Question 2009 - 2012 vs. 2013

OK, So the main difference that I have noticed is with the front bumper and grill between the 2012 and the 2013. I see a lot of parts online that say they are for 2009 - 2012, or 2009 - 2013. Are the sites just not updated? Are the parts for the 2013 fit just not out yet?

My question is though, what fits? and what doesn't?

I just got my 2013 Honda Fit from the dealership with only 15 miles on it, and I can't wait to start moding it up! Of course as of right now everything I can without voiding the warranty. I am new here, and to the JDM community. I drove a 2000 Honda Accord LX for about 6 years, and a '96 Dodge Avenger before that.

Anyways, to all the 2013 owners out there, what works with the 2013 fit? I dont want to spend $300 on something, only to find out that it wont fit on my fit.

Things I would like to do:
Exterior:
  • Head lights
  • Tail lights
  • Full Body Kit
  • Grill
  • JDM Emblem on rear
  • Grip Springs - I want to get about a 1' drop.
Interior:
  • Racing Seats
  • Short Shifter
  • Racing Pedals
  • Maybe additional guages, after I add some engine mods.

Thanks in advance.
 
  #2  
Old 06-22-2013 | 12:08 PM
fujisawa's Avatar
Member
Joined: May 2012
Posts: 1,656
From: Boston, MA
5 Year Member
Part numbers sometimes change when the refresh occurs even if the part is the same. And the sites are designed more to enable correct repair ordering; if you are repairing a customer's 2011 door you don't want to get the 2013 door garnish.

I doubt I can give you a comprehensive list of differences, but here's the big ones. As you pointed out, the bumper and grille are different. The wheels and tires. Some interior finishings were made a bit more plush. I think the suspension is identical although some people have speculated the shocks are slightly softer after the refresh.

But in general, what I CAN tell you is, all the mounting points for various parts are identical. So as an example, if you bought a 2013 bumper it would swap onto a 2011 car. Therefore if a part is listed to fit on the pre-fresh cars it will fit on the post-refresh and vice versa.

I couldn't think of any exceptions to that -- but there might be some -- anyone else?
 
  #3  
Old 06-23-2013 | 07:23 AM
specboy's Avatar
Member
5 Year Member
Joined: Aug 2009
Posts: 2,462
From: Vermont
There's no guaruntee that anything will work until someone has tried it but if you think about it this way, you should be fairly safe:

If it is cosmetic in nature (bumper covers, etc...) It may not work without multiple pieces being ordered (such as a 2012 bumper cover would need 2012 or earlier Fogs, Grille Insert, maybe different headlights, etc...) if you bought all of that, you could install the cover (and the rest of those components)

If it is mechanical in nature (shifter, Seats, etc...) it should fit without any issues as the MMC (Minor Model change)/refresh is almost always largely cosmetic to give a fresher look.

hope this helps.

~SB
 
  #4  
Old 06-23-2013 | 07:28 PM
DrewE's Avatar
Member
Joined: Aug 2012
Posts: 1,199
From: Vermont, USA
I understand that there are no differences between the 2012 and 2013 Fit's aside from one or two color options. Any accessories and such that fit a 2012 should work on a 2013. The grille/bumper differences you've seen may be Sport vs. Base model differences.
 
  #5  
Old 06-23-2013 | 09:57 PM
kaptivesmoke's Avatar
Thread Starter
|
Member
Joined: Jun 2013
Posts: 28
From: Austin, TX
Awesome! I am really looking forward to getting this car modded up!
I went out and took some pictures of the car finally!





 
  #6  
Old 06-25-2013 | 02:50 AM
RUNUMHARD's Avatar
New Member
Joined: Jun 2013
Posts: 18
From: Kaneohe, Hawaii
I'm in the same boat. Picking up a 2013 in a few weeks. Baby just arrived and I need a "family" car. But that doesn't mean I can't dress it up. Lol
 
  #7  
Old 06-25-2013 | 02:19 PM
kaptivesmoke's Avatar
Thread Starter
|
Member
Joined: Jun 2013
Posts: 28
From: Austin, TX
It has been an awesome car so far! I just need to double check what I can do to the fit, without voiding the warranty. I bought the extended 7 year warranty, and I am almost regretting it. Might have to see what I can do to go back to just the tree year.

To everybody, what kind of repairs to your Fit have you had to make? At how many miles?
 
  #8  
Old 06-25-2013 | 02:58 PM
LDB's Avatar
LDB
Member
Joined: Jun 2013
Posts: 32
From: greater Houston
You really need to read up on Magnusson-Moss so you never again say the phrase "void my warranty". It's like saying someone "gives 110%". NO they do not. 100% is all there is. You can't have or give more than all. You CAN NOT void your warranty. That's against the law under Magnusson-Moss. It is possible for one small part of your warranty to be voided on one single system or component of your car if it can be proven that either you modified it in a way that caused a failure or you ignored proper maintenance procedures and timetables and allowed it to go unmaintained causing a failure. They can not deny warranty on your air conditioner because you changed sway bars or they can't deny warranty on your rear window wiper because you changed your air intake. IOW they CAN NOT "void your warranty".
 
  #9  
Old 06-25-2013 | 03:20 PM
kaptivesmoke's Avatar
Thread Starter
|
Member
Joined: Jun 2013
Posts: 28
From: Austin, TX
Couldn't have been stated better. I have been reading around, trying to figure out what the correct way to put it is. Nothing I have read so far has explained this way. Thanks LDB!
 
  #10  
Old 06-25-2013 | 03:36 PM
rprpclark's Avatar
Member
Joined: Jun 2010
Posts: 80
From: Central OH
5 Year Member
LDB, excellent explanation. As far as "will it fit" why not just ask the vendor. And ask their return policy.
 
  #11  
Old 06-25-2013 | 04:54 PM
LDB's Avatar
LDB
Member
Joined: Jun 2013
Posts: 32
From: greater Houston
Ok, no offense kaptivesmoke but your photo is so gigantic it stretches the window and makes the text of all the posts spill out the sides. Any way you can maybe crop out the far left trees so it's no wider than the screen?
 
  #12  
Old 06-25-2013 | 05:17 PM
cjecpa's Avatar
Member
5 Year Member
iTrader: (1)
Joined: May 2006
Posts: 2,667
From: Binghamton, ny usa
Originally Posted by kaptivesmoke
Things I would like to do:
Exterior:
  • Head lights
  • Tail lights
  • Full Body Kit
  • Grill
  • JDM Emblem on rear
  • Grip Springs - I want to get about a 1' drop.
Interior:
  • Racing Seats
  • Short Shifter
  • Racing Pedals
  • Maybe additional guages, after I add some engine mods.

Thanks in advance.
A few options.

Some options on taillights for your car.

https://www.fitfreak.net/forums/fit-...aillights.html

Emblems

https://www.fitfreak.net/forums/2nd-...ed-emblem.html

Springs

https://www.fitfreak.net/forums/2nd-...your-pics.html
 
  #13  
Old 06-25-2013 | 05:25 PM
kaptivesmoke's Avatar
Thread Starter
|
Member
Joined: Jun 2013
Posts: 28
From: Austin, TX
Thanks cjecpa! Awesome threads that I haven't seen yet!
And hope that Signature is better LDB! I knew I needed to resize it, just hadn't yet.
 
  #14  
Old 06-25-2013 | 06:00 PM
LDB's Avatar
LDB
Member
Joined: Jun 2013
Posts: 32
From: greater Houston
Yes, fits on one screen now without scrolling back and forth to read each line. Thanks.
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
klemmaniac
2nd Generation (GE 08-13)
47
07-27-2016 07:17 PM
Tk3
2nd Generation (GE 08-13)
150
04-22-2014 11:31 AM
StinklePink
2nd Generation (GE 08-13)
1
11-28-2012 07:19 AM
markmarz
2nd Generation (GE 08-13)
10
10-01-2012 01:30 AM



Quick Reply: 2009 - 2012 vs. 2013



All times are GMT -4. The time now is 05:23 PM.