If you own a Chinese made fit, you should read this.
#21
all hondas seem to have thin paint these days so the chinese paint must be really really thin
#22
I have a lot of experience outsourcing metalwork to China, (an unfortunate requirement of my job). It's probably not the paint thickness but most likely the quality of the pre-plated steel, or their process control in applying the primer.
#23
I agree on the manufacturers using thin paint. When I was still working at Honda, most of the techs said that the paint they use on new cars are crappy/thinner. Not only for Honda, but for the other manufacturers as well.
#27
I have to agree with you. They've been building the Fit/Jazz in China since 2005 or 2006. How on earth it is possible that rust can be occurring in this spot after so many years of production? There's absolutely no excuse and it reflects very poorly upon Honda.
#28
with growning tensions between china and japan, i would not trust buying a japanese branded car made in china.
#29
But still...Honda's quality control, which should include suppliers quality verifications, appears lacking.
#30
I doubt this is something that's going to be hugely apparent upon initial assembly of the car.
But we get it, wetphoto knows infinitely more than Honda and that's why he's trolling a Fit board after selling the car.
But we get it, wetphoto knows infinitely more than Honda and that's why he's trolling a Fit board after selling the car.
#31
Obviously, I know more about car building than you, since I worked at one of the Big 3 for years. I don't, however, go around making excuses for any company where things are slipping. I do not have a shrine where I worship the big H, regardless of the truth. If you knew anything about assembly, and quality control, you would know that they could test parts at random, and when a problem shows up, like rust, find the cause immediately.
#32
Obviously, I know more about car building than you, since I worked at one of the Big 3 for years. I don't, however, go around making excuses for any company where things are slipping. I do not have a shrine where I worship the big H, regardless of the truth. If you knew anything about assembly, and quality control, you would know that they could test parts at random, and when a problem shows up, like rust, find the cause immediately.
They're going to test the car for a few months at random? Sounds entirely plausible and cost efficient. I'm sure one of the big three did the same while you worked for them, you know while they were the masters of shoddy manufacture.
I'm not posting again, you can continue to take this off-topic as you do every time you post, because you hate Hondas/your old Fit and yet can't leave the message board.
#33
Wow. Kudos.
They're going to test the car for a few months at random? Sounds entirely plausible and cost efficient. I'm sure one of the big three did the same while you worked for them, you know while they were the masters of shoddy manufacture.
I'm not posting again, you can continue to take this off-topic as you do every time you post, because you hate Hondas/your old Fit and yet can't leave the message board.
They're going to test the car for a few months at random? Sounds entirely plausible and cost efficient. I'm sure one of the big three did the same while you worked for them, you know while they were the masters of shoddy manufacture.
I'm not posting again, you can continue to take this off-topic as you do every time you post, because you hate Hondas/your old Fit and yet can't leave the message board.
#34
Australia finds asbestos in Chinese-built cars, prompts recall
China's product safety reputation took another hit today, as the Australian Competition and Consumer Commission announced a recall of 23,000 Chinese vehicles made by Great Wall and Chery. The vehicles have engine and exhaust gaskets that contain asbestos, a known carcinogen that is prohibited in Australia. Both manufacturers have been directed to stop selling the affected vehicles, and owners have been warned not to perform any do-it-yourself repairs that involve the problem gaskets.
The recall raises questions about Chinese automakers plans to increase exports, not only to Australia but Europe and potentially even the United States. Yet a spokesman for Great Wall told Bloomberg that the recall "won't have much impact on our export and overseas expansion plans."
How the asbestos-containing parts came to be used in the Australian cars is unclear, but a Chery spokesman told the news agency that the automaker made a mistake, building the cars with a batch of parts that were not intended for use in export cars. But an Australian public affairs official indicated that the recall affects a majority of the vehicles the two Chinese automakers have imported.
Great Wall began exporting vehicles to Australia in 2009 and Chery followed in 2011, according to the report. Combined, they sold just over 17,000 vehicles in Australia between 2010-2011. Models affected by the recall include the Great Wall SA220, V240, X240, V200 and X200 (pictured), as well as the Chery J11 and J3.
Funny how they said not intended for export.
China's product safety reputation took another hit today, as the Australian Competition and Consumer Commission announced a recall of 23,000 Chinese vehicles made by Great Wall and Chery. The vehicles have engine and exhaust gaskets that contain asbestos, a known carcinogen that is prohibited in Australia. Both manufacturers have been directed to stop selling the affected vehicles, and owners have been warned not to perform any do-it-yourself repairs that involve the problem gaskets.
The recall raises questions about Chinese automakers plans to increase exports, not only to Australia but Europe and potentially even the United States. Yet a spokesman for Great Wall told Bloomberg that the recall "won't have much impact on our export and overseas expansion plans."
How the asbestos-containing parts came to be used in the Australian cars is unclear, but a Chery spokesman told the news agency that the automaker made a mistake, building the cars with a batch of parts that were not intended for use in export cars. But an Australian public affairs official indicated that the recall affects a majority of the vehicles the two Chinese automakers have imported.
Great Wall began exporting vehicles to Australia in 2009 and Chery followed in 2011, according to the report. Combined, they sold just over 17,000 vehicles in Australia between 2010-2011. Models affected by the recall include the Great Wall SA220, V240, X240, V200 and X200 (pictured), as well as the Chery J11 and J3.
Funny how they said not intended for export.
#35
Check the bottom of your front car seats seems that BMW was getting their seats from China and was developing rust.
BMW 3 Series (F30) seat rust issue causes owner to destroy car in protest! - BMW 3-Series Forum (F30 / F32) | F30POST
http://f20.1addicts.com/forums/showthread.php?t=743476
BMW 3 Series (F30) seat rust issue causes owner to destroy car in protest! - BMW 3-Series Forum (F30 / F32) | F30POST
http://f20.1addicts.com/forums/showthread.php?t=743476
Last edited by cjecpa; 03-12-2013 at 09:28 PM.
#37
Check the bottom of your front car seats seems that BMW was getting their seats from China and was developing rust.
BMW 3 Series (F30) seat rust issue causes owner to destroy car in protest! - BMW 3-Series Forum (F30 / F32) | F30POST
Rust on seat base - BMW 1-Series Forum (F20) 135i - 1Addicts.com
BMW 3 Series (F30) seat rust issue causes owner to destroy car in protest! - BMW 3-Series Forum (F30 / F32) | F30POST
Rust on seat base - BMW 1-Series Forum (F20) 135i - 1Addicts.com
#38
Let us know if you find anything. It'd be interesting to see how widespread this problem is on our side of the pond.
#40
Do they sell China-made Fits in the USA? How can you identify one, VIN?
I am glad I got my Fit before they moved production from Japan to Mexico. Wonder what kind of quality the '14s will have coming out of a new plant...
I am glad I got my Fit before they moved production from Japan to Mexico. Wonder what kind of quality the '14s will have coming out of a new plant...