wheels and suspension finally added
#1
wheels and suspension finally added
After a ton of waiting on wheels and suspension sitting on my desk for about a month I was finally able to get everything set up. Wheels have been a nightmare for my car after a flaked forum member and 4x100 becoming more and more elusive. I hit up Jason at Rotiform for a set of BLQs that were slated for 4 lug release and after a lot of patience and sweet talking he came thru with some filled and redrilled units after those plans fell thru.
Suspension is from Tanabe in the recently released Pro S-OC with helper springs. Great product, stoked to add the rest of their braces in the near future.
Rolled and pulled and camber bolts came in today to address the front a little more then I will drop it down some more as well, maybe some 3mms in the back. 18x8.5 +45mm all around 215/40 yokos
Suspension is from Tanabe in the recently released Pro S-OC with helper springs. Great product, stoked to add the rest of their braces in the near future.
Rolled and pulled and camber bolts came in today to address the front a little more then I will drop it down some more as well, maybe some 3mms in the back. 18x8.5 +45mm all around 215/40 yokos
#5
Not liking the stretched look either. Combination of stretched and improperly mounted tires and there could possibly be a tire failure in the OP's future.
~SB
#8
sucks about the backward mounted tires. are you sure those wheels are a +45 offset? my type c's are +44 and i have 5mm spacers on the rear which makes it +39 and i am no where near how flush your wheels are.
#9
Well...
18x8.5 +45mm all around 215/40 yokos
vs
SSR type C 16x6.5, +44 Conti DWS
#12
Pretty sure my tire guy hates me, lol. I caught the backwards mount before we put them on and decided the run them while working on the roll/pull so it only mangles up the "inside" of the tire while clearance is checked. SPC camber bolts today and maybe a little more low and pull
#14
Seem like these wheels are heavy...from what I've found they are probably between 26 and 29lbs a piece...
Rotiform BLQ Wheels BACK IN STOCK!! {Redline Motorworks} - VW GTI Forum / VW Rabbit Forum / VW R32 Forum / VW Golf Forum - Golfmkv.com
Rotiform BLQ and NUE in 17" sizes - The Ford Focus Forum | Powered by Focaljet
Rotiform BLQ Wheels BACK IN STOCK!! {Redline Motorworks} - VW GTI Forum / VW Rabbit Forum / VW R32 Forum / VW Golf Forum - Golfmkv.com
Rotiform BLQ and NUE in 17" sizes - The Ford Focus Forum | Powered by Focaljet
#15
Extra heavy, I can honestly tell you I was scared to even weigh them when they came in. I have another lighter set on order so this was more aesthetic for the interim that will clear the brake kit I have on order. Until then, no canyon runs
#19
~SB
#20
?|? Rotiform Wheels ?|?
the rootbeer option sold me more than anything else for sure