Your list of mods for the GE
#45
installed:
Eibach Pro-Kit
will have soon :
Injen short ram intake
18x7 Motegi ff7 or sp10 black rims
Tanabe Medalion Concept G
Neoprene front and back blue & black seat covers by: shearcomfort.com
window tint 50% front and 15% back
blue H emblems ( but i cant seem to find any were do you find these at? )
Down the road:
Cams when they come out
intake manifold
headers
front strut tower brace
back strut tower brace
sparco black and blue racing seats
body kit
candy blue pant job
and blue and black interior
Eibach Pro-Kit
will have soon :
Injen short ram intake
18x7 Motegi ff7 or sp10 black rims
Tanabe Medalion Concept G
Neoprene front and back blue & black seat covers by: shearcomfort.com
window tint 50% front and 15% back
blue H emblems ( but i cant seem to find any were do you find these at? )
Down the road:
Cams when they come out
intake manifold
headers
front strut tower brace
back strut tower brace
sparco black and blue racing seats
body kit
candy blue pant job
and blue and black interior
#46
My list of mods:
-35% tint all around F1 Pinacale
-JDM base taillights
-Eibach prokit springs
-Volk Racing ce28 17*7.5 Bronze with GT vr.2 center caps
-Volk Racing lug nuts
-HyperGround system to help with shetty electronic system... it really works!!!
-35% tint all around F1 Pinacale
-JDM base taillights
-Eibach prokit springs
-Volk Racing ce28 17*7.5 Bronze with GT vr.2 center caps
-Volk Racing lug nuts
-HyperGround system to help with shetty electronic system... it really works!!!
Last edited by 8o8diff; 08-14-2009 at 02:22 AM.
#47
Locking lugs
August 20th:
Dealer installs Mugen Quick Shifter Kit, Interior Illumunation, Door Visors, Body Side Molding and M/T Pedal Kit
I will install the Cargo Cover and Leather Shift Knob
Soon:
Virginia Limit Tint
3m clearbra for front end of car
Mugen Floor Mats
A/C radiator and Fog protections
Variable Intermittent Wiper
That meep-meep horn has got to go.
Debateable:
Winking Side Mirrors
Dream:
Supercharger
August 20th:
Dealer installs Mugen Quick Shifter Kit, Interior Illumunation, Door Visors, Body Side Molding and M/T Pedal Kit
I will install the Cargo Cover and Leather Shift Knob
Soon:
Virginia Limit Tint
3m clearbra for front end of car
Mugen Floor Mats
A/C radiator and Fog protections
Variable Intermittent Wiper
That meep-meep horn has got to go.
Debateable:
Winking Side Mirrors
Dream:
Supercharger
Last edited by ForceFit; 08-14-2009 at 05:34 PM.
#48
Locking lugs
August 20th:
Dealer installs Mugen Quick Shifter Kit, Interior Illumunation, Door Visors, Body Side Molding and M/T Pedal Kit
I will install the Cargo Cover and Leather Shift Knob
Soon:
Virginia Limit Tint
3m clearbra for front end of car
Mugen Floor Mats
A/C radiator and Fog protections
Variable Intermittent Wiper
Debateable:
Winking Side Mirrors
Dream:
Supercharger
August 20th:
Dealer installs Mugen Quick Shifter Kit, Interior Illumunation, Door Visors, Body Side Molding and M/T Pedal Kit
I will install the Cargo Cover and Leather Shift Knob
Soon:
Virginia Limit Tint
3m clearbra for front end of car
Mugen Floor Mats
A/C radiator and Fog protections
Variable Intermittent Wiper
Debateable:
Winking Side Mirrors
Dream:
Supercharger
#49
SO Far:
Sid Short Ram Intake
Denso IK22 plugs
35% tint front and rear
35% windshield strip
Future Mods
Progress lowering springs
JSP Carbon fiber wind splitter
VIS Racing Terminator Carbon fiber hood.
Drilled front brake rotors.
Sid Short Ram Intake
Denso IK22 plugs
35% tint front and rear
35% windshield strip
Future Mods
Progress lowering springs
JSP Carbon fiber wind splitter
VIS Racing Terminator Carbon fiber hood.
Drilled front brake rotors.
#50
My mods so far are:
Tint : 15% front & 10% rear // 8000k HIDs w/ yellow tinted fogs // blue dome light // custom blue neon at footwell (pulses to music) // swift springs // k&n intake // swapped headlights // tinted taillights // de-badged // AVH-P4100DVD w/ bypass // ..more to come
Next mod = finish install vinyl on roof // rims
Tint : 15% front & 10% rear // 8000k HIDs w/ yellow tinted fogs // blue dome light // custom blue neon at footwell (pulses to music) // swift springs // k&n intake // swapped headlights // tinted taillights // de-badged // AVH-P4100DVD w/ bypass // ..more to come
Next mod = finish install vinyl on roof // rims
#51
I think it's the blue lights from the description and the installation guide I got from the accessories lady. I'll find out next friday when all the dealer installed goodies are done.
#52
so here goes my list
OEM Leather Shifter
OEM Center Console
T1R Suede Shift Boot
T1R Short Shifter
Honda Accord 2008 Mod
Blacked out Headlight Housing
6000k HID kit
Nokya yellow fog lights
independent fog light modhttps://www.fitfreak.net/forums/2nd-...eadlights.html
Ebay LED taillights, somewhat smoked. https://www.fitfreak.net/forums/2nd-...led-tails.html
JDP CF lip
Tanabe DF210 springs
SSR Type -C 17x7.5 +42
205/45/17 Falken tires
Pioneer AVIC F700bt
Alpine Type -S 6 1/2 Speakers all around
Alpine Type -E 10 inch sub
Alpine MRP -M500
Tinted 20% all around and 5% 7 inch strip on the windshield
Cargo Tray
Weather Tech Front Mats
umm i dont think im missing anything else?
soon to come mods
JDP CF Rear Diffuser
JDP Grill
JDP CF hood when he makes one
Gloss black Vinyl roof
OEM Leather Shifter
OEM Center Console
T1R Suede Shift Boot
T1R Short Shifter
Honda Accord 2008 Mod
Blacked out Headlight Housing
6000k HID kit
Nokya yellow fog lights
independent fog light modhttps://www.fitfreak.net/forums/2nd-...eadlights.html
Ebay LED taillights, somewhat smoked. https://www.fitfreak.net/forums/2nd-...led-tails.html
JDP CF lip
Tanabe DF210 springs
SSR Type -C 17x7.5 +42
205/45/17 Falken tires
Pioneer AVIC F700bt
Alpine Type -S 6 1/2 Speakers all around
Alpine Type -E 10 inch sub
Alpine MRP -M500
Tinted 20% all around and 5% 7 inch strip on the windshield
Cargo Tray
Weather Tech Front Mats
umm i dont think im missing anything else?
soon to come mods
JDP CF Rear Diffuser
JDP Grill
JDP CF hood when he makes one
Gloss black Vinyl roof
Last edited by strmslvrfit; 08-16-2009 at 03:44 PM.
#53
#55
2009 Honda Fit Sport MT, Non-Navi
Taffeta White
Purchased 28 July 2009
Mods to Date:
- Variable Intermittent Wipers Conversion
- T1R Short Shifter
- CIPA Auto Dimming Mirror w/ Temp & Compass
- Acura Cargo Light w/ Switch
- FIAMM Horns (Hi / Low Tones) from Late Model Audi
- Honda Carpeted Floor Mats
- Cargo Cover
- Cargo Tray
Mods Coming Soon:
- Arm Rest
Taffeta White
Purchased 28 July 2009
Mods to Date:
- Variable Intermittent Wipers Conversion
- T1R Short Shifter
- CIPA Auto Dimming Mirror w/ Temp & Compass
- Acura Cargo Light w/ Switch
- FIAMM Horns (Hi / Low Tones) from Late Model Audi
- Honda Carpeted Floor Mats
- Cargo Cover
- Cargo Tray
Mods Coming Soon:
- Arm Rest
#56
HONDA emblem badge H CIVIC HRV CRV ACCORD JAZZ blue 3":eBay Motors (item 170371165788 end time Aug-18-09 11:01:25 PDT)
can't tell if they're real or not
#57
So far I have:
all season mats
cargo tray
door visors
Mugen pedals
Volk ce28n time attack wheels 15x7.0
On the way:
Mugen shift knob
Mugen short shifter
Mugen front grill
Eibach sportline springs
Still trying to find:
axle back exhaust
intake
sway bars
red emblems
all season mats
cargo tray
door visors
Mugen pedals
Volk ce28n time attack wheels 15x7.0
On the way:
Mugen shift knob
Mugen short shifter
Mugen front grill
Eibach sportline springs
Still trying to find:
axle back exhaust
intake
sway bars
red emblems
#58
are these the ones?
HONDA emblem badge H CIVIC HRV CRV ACCORD JAZZ blue 3":eBay Motors (item 170371165788 end time Aug-18-09 11:01:25 PDT)
can't tell if they're real or not
HONDA emblem badge H CIVIC HRV CRV ACCORD JAZZ blue 3":eBay Motors (item 170371165788 end time Aug-18-09 11:01:25 PDT)
can't tell if they're real or not
#59
Still waiting to take delivery of the Fit which will come in Premium White Pearl. It has already been since the 14th of November since ordering and it won't be arriving till around the 20th of January according to Sato-San.
In the meantime I have waiting to install, Bride FX rails (non-sliding FIA approved rails) with Bride carbon ZetaIII seats (cheated on the seats as I already owned them), ProjectMu HC+ pads all around, ProjectMu brakelines and coming with the car are the stock Honda visors and Honda Access sport suspension which will drop it about 25mm(1"). Also already have a Sabelt 3" FIA seatbelt which would only be used if/when I can take the car out on one of the many circuits around here. A 300mm Momo wheel with WorksBell quick release hub. Will probably be ordering in the next week or 2, Volk RE30s in 16x6.5+45 with 195/50-16 BS RE11 tires.
Will be taking the car to KentWorks up in Saitama to hopefully have a one-off Ti exhaust made. I was going to go J's Racing, but really I am not too fond of their Ti alloy after owning their 70RS dual on my old Snisen, when compared to what I had on my old 5R Teggy (which was fitted with an Amuse R1). Moreso I guess I prefer the craftsmanship of pie-cutting and welding the bends versus a lesser Ti alloy with mandrel bends. Also the whole exhaust from Js goes for about $2300 with the current exchange rate which to me is just outright robbery on their part. My 70RS dual which had more material overall cost less than what they are charging for the full Fit exhaust. So I would rather spend about the same maybe a tad more or possibly less on a full one-off piece and have it made non-resonated with at least 54mm piping versus the 50 of the Js.
Probably will get some J's interior dressup items (full gamut) and their front lower wing spoiler in black, carbon rear diffuser and front grill. Would get their bonnet as well, but I want something ducted and also their bonnets are made by First Molding so would probably just go that route anyways and get one made in full carbon versus carbon/frp with some ducts to alleviate some of the heat.
Obviously no pictures of the car as of yet.
EDIT: Well I couldn't wait and just ordered the Volk RE30 16x6.5 +45 in Hyper Bronze Premium. As well as some center caps to go with them.
The ¥/$ exchange really does blow hard. Though you only live once and money was only created to be spent.
Just found the bonnet I want, it's a carbon bonnet from TracySports/Ings.
It has an outlet in the rear of the bonnet that is not really noticeable looking from the front. Definitely going to pick this up in the very near future. Yesterday ordered a PRM intake and received confirmation it has been shipped, hopefully the quality is pretty decent on it otherwise it will be going bye bye in a hurry. Ordered all the Js carbon interior pieces except for the mirror cover and their front lower wing with the sideplates, grill and rear diffuser. Thinking hard about the Spoon mirrors, might take a trip up to Spoon/TypeOne and check them out in person (about an hour away). I do wish they offered them in carbon, but the black color will work overall. The wheels should arrive on the 17th or 18th according to the email I got from the company I ordered from. I'll take some pics of what I have in waiting when they come in and post up.
Come on Honda where is my damn Fit!!!
Still waiting on the car, another 3 weeks to go. Just ordered last night the T1R shift boot w/red stiching, T1RxALEX gradient finish Ti knob, T1R chromoly lugs and Volk Racing GT low center caps in black with red lettering. Didn't really need the center caps as I already have the ones pictured above, but this way I can swap out from time to time for a slightly different look or if I just like one better than the other I can sell off whichever to someone.
Another slight update, some more parts ordered. The T1R C-pillar bar and Zoom Engineering Carbon Monaco and TC room mirrors. Only ordered both to see which one I prefer more and will most likely sell the other one. Still another 2 weeks or so to go.
In the meantime I have waiting to install, Bride FX rails (non-sliding FIA approved rails) with Bride carbon ZetaIII seats (cheated on the seats as I already owned them), ProjectMu HC+ pads all around, ProjectMu brakelines and coming with the car are the stock Honda visors and Honda Access sport suspension which will drop it about 25mm(1"). Also already have a Sabelt 3" FIA seatbelt which would only be used if/when I can take the car out on one of the many circuits around here. A 300mm Momo wheel with WorksBell quick release hub. Will probably be ordering in the next week or 2, Volk RE30s in 16x6.5+45 with 195/50-16 BS RE11 tires.
Will be taking the car to KentWorks up in Saitama to hopefully have a one-off Ti exhaust made. I was going to go J's Racing, but really I am not too fond of their Ti alloy after owning their 70RS dual on my old Snisen, when compared to what I had on my old 5R Teggy (which was fitted with an Amuse R1). Moreso I guess I prefer the craftsmanship of pie-cutting and welding the bends versus a lesser Ti alloy with mandrel bends. Also the whole exhaust from Js goes for about $2300 with the current exchange rate which to me is just outright robbery on their part. My 70RS dual which had more material overall cost less than what they are charging for the full Fit exhaust. So I would rather spend about the same maybe a tad more or possibly less on a full one-off piece and have it made non-resonated with at least 54mm piping versus the 50 of the Js.
Probably will get some J's interior dressup items (full gamut) and their front lower wing spoiler in black, carbon rear diffuser and front grill. Would get their bonnet as well, but I want something ducted and also their bonnets are made by First Molding so would probably just go that route anyways and get one made in full carbon versus carbon/frp with some ducts to alleviate some of the heat.
Obviously no pictures of the car as of yet.
EDIT: Well I couldn't wait and just ordered the Volk RE30 16x6.5 +45 in Hyper Bronze Premium. As well as some center caps to go with them.
The ¥/$ exchange really does blow hard. Though you only live once and money was only created to be spent.
Just found the bonnet I want, it's a carbon bonnet from TracySports/Ings.
It has an outlet in the rear of the bonnet that is not really noticeable looking from the front. Definitely going to pick this up in the very near future. Yesterday ordered a PRM intake and received confirmation it has been shipped, hopefully the quality is pretty decent on it otherwise it will be going bye bye in a hurry. Ordered all the Js carbon interior pieces except for the mirror cover and their front lower wing with the sideplates, grill and rear diffuser. Thinking hard about the Spoon mirrors, might take a trip up to Spoon/TypeOne and check them out in person (about an hour away). I do wish they offered them in carbon, but the black color will work overall. The wheels should arrive on the 17th or 18th according to the email I got from the company I ordered from. I'll take some pics of what I have in waiting when they come in and post up.
Come on Honda where is my damn Fit!!!
Still waiting on the car, another 3 weeks to go. Just ordered last night the T1R shift boot w/red stiching, T1RxALEX gradient finish Ti knob, T1R chromoly lugs and Volk Racing GT low center caps in black with red lettering. Didn't really need the center caps as I already have the ones pictured above, but this way I can swap out from time to time for a slightly different look or if I just like one better than the other I can sell off whichever to someone.
Another slight update, some more parts ordered. The T1R C-pillar bar and Zoom Engineering Carbon Monaco and TC room mirrors. Only ordered both to see which one I prefer more and will most likely sell the other one. Still another 2 weeks or so to go.
Last edited by 555sexydrive; 01-04-2010 at 09:35 PM. Reason: Slight update...again
#60
2009 Fit Sport M/T
Current Mods
-Mugen body kit
-Mugen mirror cover
-Mugen pedals
-Mugen floormats
-Mugen short shifter
-Delete exhaust tip (inside the Mugen exhaust trim)
-PIAA Super White 9003's
-Mugen window visors (on order)
-Superbrightleds.com LED front running lights
-PIAA Hyper Yellow foglight bulbs in stock housings
Future Mods
-15x7 TR Motorsport (ordered online last night)
-Eibach Pro-Kits
-Progress RSB
-K&N drop in/airbox mod
-Red emblems
-RS tails
-exhaust?
-Throttle controller
Current Mods
-Mugen body kit
-Mugen mirror cover
-Mugen pedals
-Mugen floormats
-Mugen short shifter
-Delete exhaust tip (inside the Mugen exhaust trim)
-PIAA Super White 9003's
-Mugen window visors (on order)
-Superbrightleds.com LED front running lights
-PIAA Hyper Yellow foglight bulbs in stock housings
Future Mods
-15x7 TR Motorsport (ordered online last night)
-Eibach Pro-Kits
-Progress RSB
-K&N drop in/airbox mod
-Red emblems
-RS tails
-exhaust?
-Throttle controller
Last edited by FITProject; 12-30-2009 at 05:04 PM.