What did you do to your GE fit today?
for those of you who have the JDP duckbill (or any jdp spoiler).. since it only mounts with the two bolts up top and 3m tape.. is there any holes left over from the stock spoiler?
if so, how did you cover them?
if so, how did you cover them?
Installed Swift Springs today, and thanks to the prep work, everything went on smoothly.
Took the opportunity to weight my previous shock and spring and compare them to the Swifts and Bilstein damper
Bilstein PSS progressive springs + TEIN Street Flex Twintube Damper 9.84kg
SWIFT Springs + Bilstein PSS Monotube Damper 4.76kg
Total unsprung weight reduction: 5.08kg
German Damper, Japanese Springs, American Sway Bar. Its like the United Nation of rear suspension setup...
Took the opportunity to weight my previous shock and spring and compare them to the Swifts and Bilstein damper
Bilstein PSS progressive springs + TEIN Street Flex Twintube Damper 9.84kg
SWIFT Springs + Bilstein PSS Monotube Damper 4.76kg
Total unsprung weight reduction: 5.08kg
German Damper, Japanese Springs, American Sway Bar. Its like the United Nation of rear suspension setup...
Last edited by eternal_fantasy; 08-11-2015 at 01:45 PM.
Since it uses the 2 factory mounting points at the top, I'm pretty sure the only holes left are the ones below those 2-- there's like 4 or 5 right? they're most likely just covered up by the spoiler. I don't have JDP but I do have a Seibon duckbill and I didn't really do anything to cover them(actually I wrapped the piece in vinyl to match my roof so the holes are plugged).
Some weird stuff going on with my gas indicator lately. Yesterday im on the verge on having the gas light go on, so i add about 4.5 L of gas. But after 5 minutes of light driving the light comes on. I only drove about 3 km after the top up, then maybe another 5 for the day.
This morning i drive into work (7km) and add 4.8 liters( im waiting for my weekly fill up where its a lot cheaper) start up and the light is still on. Drove home and later did my weekly grocery/gas trip( light is on the whole way). Finally do my fill up and the pump stops at 30L... So that means i had about 10L in my tank already and the light was on.. I thought it was supposed to come on at 6L. Strange.
This morning i drive into work (7km) and add 4.8 liters( im waiting for my weekly fill up where its a lot cheaper) start up and the light is still on. Drove home and later did my weekly grocery/gas trip( light is on the whole way). Finally do my fill up and the pump stops at 30L... So that means i had about 10L in my tank already and the light was on.. I thought it was supposed to come on at 6L. Strange.
Some weird stuff going on with my gas indicator lately. Yesterday im on the verge on having the gas light go on, so i add about 4.5 L of gas. But after 5 minutes of light driving the light comes on. I only drove about 3 km after the top up, then maybe another 5 for the day.
This morning i drive into work (7km) and add 4.8 liters( im waiting for my weekly fill up where its a lot cheaper) start up and the light is still on. Drove home and later did my weekly grocery/gas trip( light is on the whole way). Finally do my fill up and the pump stops at 30L... So that means i had about 10L in my tank already and the light was on.. I thought it was supposed to come on at 6L. Strange.
This morning i drive into work (7km) and add 4.8 liters( im waiting for my weekly fill up where its a lot cheaper) start up and the light is still on. Drove home and later did my weekly grocery/gas trip( light is on the whole way). Finally do my fill up and the pump stops at 30L... So that means i had about 10L in my tank already and the light was on.. I thought it was supposed to come on at 6L. Strange.
Im gunna wait and see if this happens again. I did have my car sit for 2 weeks while i was on vacation with around 30% of the tank full. So maybe it just got stuck? Anyway, now that the tank is full it does read full. But thanks for the p/n.
Since it uses the 2 factory mounting points at the top, I'm pretty sure the only holes left are the ones below those 2-- there's like 4 or 5 right? they're most likely just covered up by the spoiler. I don't have JDP but I do have a Seibon duckbill and I didn't really do anything to cover them(actually I wrapped the piece in vinyl to match my roof so the holes are plugged).
I'll seal it someway just in case.. On my Integra the trunk started rusting a bit after a bunch of years where the type r spoiler went on.. Want to not repeat haha
Thanks! Haven't taken the spoiler off or seen what's under there..still waiting for shipment To come... Just know from the spoiler mod there's some stuff under there.. 4 or 5 is prob right
I'll seal it someway just in case.. On my Integra the trunk started rusting a bit after a bunch of years where the type r spoiler went on.. Want to not repeat haha
I'll seal it someway just in case.. On my Integra the trunk started rusting a bit after a bunch of years where the type r spoiler went on.. Want to not repeat haha
Install my JDM Fit RS Mugen Side Skirt today
Here is the link to the DIY:
https://www.fitfreak.net/forums/2nd-...ide-skirt.html
Here is the link to the DIY:
https://www.fitfreak.net/forums/2nd-...ide-skirt.html
Install my JDM Fit RS Mugen Side Skirt today
Here is the link to the DIY:
https://www.fitfreak.net/forums/2nd-...ide-skirt.html
Here is the link to the DIY:
https://www.fitfreak.net/forums/2nd-...ide-skirt.html
So much win.. so close yet so far-- I want to see this in person!! Always loved this build
Install my JDM Fit RS Mugen Side Skirt today
Here is the link to the DIY:
https://www.fitfreak.net/forums/2nd-...ide-skirt.html
Here is the link to the DIY:
https://www.fitfreak.net/forums/2nd-...ide-skirt.html
Is your rear bumper still pearl white?
by the way my rear bumper is already Taffeta White
Oh, and I just finished from my second project of the day,
Installing J's Racing Carbon Fiber Steering Wheel plus Trim:
Here are the DIY Thread:
https://www.fitfreak.net/forums/2nd-...plus-trim.html
Thanks Burzpaw and Thanks jdmj0,
by the way my rear bumper is already Taffeta White
Oh, and I just finished from my second project of the day,
Installing J's Racing Carbon Fiber Steering Wheel plus Trim:
Here are the DIY Thread:
https://www.fitfreak.net/forums/2nd-...plus-trim.html
by the way my rear bumper is already Taffeta White
Oh, and I just finished from my second project of the day,
Installing J's Racing Carbon Fiber Steering Wheel plus Trim:
Here are the DIY Thread:
https://www.fitfreak.net/forums/2nd-...plus-trim.html
I don't plan to put the red emblem.
I just worry if (knock on wood) the airbag deploy,
then that red honda emblem would fly like a projectile...
I mean unless the emblem came from Honda OEM,
I really worry if it is not designed for the airbag deployment...
just test drive the car, turn out, the steering wheel is not centered,...
oh well, need to take it out and recentered again hahaha