What did you do to your GE fit today?
Oh, my Michelin Pilot Super Sports Tire also had worn out,
hopefully I can squeeze 5,000 miles more, but that is probably it...
and since I plan to put 380mm Brembo Rotor upfront,
then I need 19in wheel.
and of course 5 lug conversion,
so I already buy 1 wheel for the purpose of fitting the rotor, brake and the
necessary custom rotor hat and caliper bracket.
I decide I am going to go with Honda Accord HFP 19in wheel
so at least it is still factory Honda Wheel
Here is the wheel that I bought:
hopefully I can squeeze 5,000 miles more, but that is probably it...
and since I plan to put 380mm Brembo Rotor upfront,
then I need 19in wheel.
and of course 5 lug conversion,
so I already buy 1 wheel for the purpose of fitting the rotor, brake and the
necessary custom rotor hat and caliper bracket.
I decide I am going to go with Honda Accord HFP 19in wheel
so at least it is still factory Honda Wheel
Here is the wheel that I bought:
Nice interior upgrades!
Centric own StopTech and produce both brands.
They have been around for a long time
The Power Stop rotors are Zinc coated apparently. I've also never heard of Centric before? Maybe its my sheltered northern life where parts that don't fit on lifted diesels don't get talked about. Come to think of it, I don't think I've ever seen a truck up here with upgraded brakes. With all the extra weight they like to pack on them, you'd think someone would've thought braking performance was important...
They have been around for a long time
installed the scangauge e i received for christmas. still needs to calibrate. shits gonna take 2 weeks since i just recently filled up the tank. partially installed sport pedals too. waiting for the rivet tool to come in from amazon.
Install My Auto Folding Wiring and Module today,
my car finally have the Auto Folding Mirror function,
more than 1 year after I install the Motorized Folding Mirror hahaha,
too bad,
I can not install the Auto Tilt (Reverse) Mirror Wiring and Module for now,
because the USDM Fit Socket and JDM Insight Socket is not compatible.
Have to do more research.
Here is the link to the DIY:
https://www.fitfreak.net/forums/2nd-...ml#post1284070
and here is the picture of my car after I arm the alarm:
my car finally have the Auto Folding Mirror function,
more than 1 year after I install the Motorized Folding Mirror hahaha,
too bad,
I can not install the Auto Tilt (Reverse) Mirror Wiring and Module for now,
because the USDM Fit Socket and JDM Insight Socket is not compatible.
Have to do more research.
Here is the link to the DIY:
https://www.fitfreak.net/forums/2nd-...ml#post1284070
and here is the picture of my car after I arm the alarm:
They do look fantastic once installed, though. Might have to get those. Debating on a J's steering wheel. Bloody expensive, though. The exchange rate isn't helping my cause lately, either. $1.81 for a quid, and $1.16 for a US Dollar.
My GE8 is in storage since I don't drive it in the snow up here in Toronto
I however have just purchased
Enkei Rpf1 16x7
Honda 70mm center caps for the rims.
replacement Enkei decals in white to match the car (dont want to use the red ones they came with)
Custom Suede armrest to match the 8th gen SI seats I have
front and rear jdm badge
cross drilled and slotted rotors and new rear drums which I will paint wrinkle black.
T1R shifter boot black with red stiching
Blox and skunk 2 lugs
and Megan Coilovers (boxing day sale)
lets just say I can not wait for spring. Worst part is my car is stored an hour away so I dont even go to see it
I however have just purchased
Enkei Rpf1 16x7
Honda 70mm center caps for the rims.
replacement Enkei decals in white to match the car (dont want to use the red ones they came with)
Custom Suede armrest to match the 8th gen SI seats I have
front and rear jdm badge
cross drilled and slotted rotors and new rear drums which I will paint wrinkle black.
T1R shifter boot black with red stiching
Blox and skunk 2 lugs
and Megan Coilovers (boxing day sale)
lets just say I can not wait for spring. Worst part is my car is stored an hour away so I dont even go to see it
Last edited by richardhylands; 12-30-2014 at 06:52 PM.
Could you let me know the part numbers for the Centric rotors you have? I was thinking of upgrading mine but just stuck to getting EBC green stuff pads. Did you get slotted or driller rotors?
My Heavy Metal Magnum XLT Power Bleeder from Motive Products just arrived
another tools for my brake projects
Heavy Metal Magnum XLT
another tools for my brake projects
Heavy Metal Magnum XLT
I just installed a yellow top optima d51r into my fit didn't modify anything except the plastic heat shield around it which I only cut one end off! Didn't have anything wrong with the other battery just didn't like having a lawn and garden tractor battery in the thing at all!
PTDC0101 by general_lee862000, on Flickr
PTDC0098 by general_lee862000, on Flickr
PTDC0101 by general_lee862000, on Flickr
PTDC0098 by general_lee862000, on Flickr