What did you do to your GE fit today?
#7421
Did you break the metal, or the part holding it in? If it's the hinge, it's just a screw that holds it down into a plastic slot. If you lost the screw, then find something slightly larger and tap into that spot with the clip held in there. It's all pretty sturdy, so I'm not sure if/how you actually broke the metal, because you can't get any of these parts from Honda without buying the whole assembly.
#7423
Hmm, good luck. Not sure what that could be.
---
Finished up the headlights. As can be seen, the difference is almost imperceptible, but one is brighter than the other. No change in color temp. Was hoping for a little whiter, but they certainly seem to be functional!
While I had the center console still out from the shift boot adjustment and short shifter, I redid the LEDs to be more secure and pointed the right directions. They are nowhere near this blue and intense in person. The camera just can't pick it up without a me doing a more careful manual exposure with a tripod.
Fun night!
---
Finished up the headlights. As can be seen, the difference is almost imperceptible, but one is brighter than the other. No change in color temp. Was hoping for a little whiter, but they certainly seem to be functional!
While I had the center console still out from the shift boot adjustment and short shifter, I redid the LEDs to be more secure and pointed the right directions. They are nowhere near this blue and intense in person. The camera just can't pick it up without a me doing a more careful manual exposure with a tripod.
Fun night!
#7425
Finished installing leds for the interior, license plate and reverse.
DIY:
Interior
Cup Holder
Reverse
DIY:
Interior
Cup Holder
Reverse
Where did you get the lights? AND do you happen to have the part numbers?
Thanks!
#7426
Dome light: 31MM
Cup holder: T5
Cargo: T10
License Plate: T10
Reverse: T10
You should be able to find them online. The ones on the video were salvaged led parts from my Accord.
Just search for Led Panel boards. Each board comes with 3 different adapter.
And for the reverse light, I'm using the T10 CREE led.
*** FYI, I noticed that the dome and the cargo light they stay dimly lit for about 30min after the door is closed. This is a common problem with leds and the solution is adding resistors in parallel . It really doesn't bother me and I know the battery will be fine but I will post a video on how to solve the dimly lit problem soon. It requires a trip to radio shack for a packet of resistors.
Last edited by Jephu; 01-18-2013 at 05:05 PM.
#7428
I will make another video during the day for better view.
http://www.radioshack.com/product/in...ductId=2062323
Last edited by Jephu; 01-19-2013 at 04:25 AM.
#7429
DIY: Dimly Lit LED Fix
I will make another video during the day for better view.
1K ohm 1/2W 5% Carbon Film Resistor pk/5 : Resistors | RadioShack.com
I will make another video during the day for better view.
1K ohm 1/2W 5% Carbon Film Resistor pk/5 : Resistors | RadioShack.com
#7434
Damn ! U probably wanting cash huh? I'm trying to sell mine as well, (bbs) but which ccw u getting rid off? No chance in trading? (If specs are what I'm looking for and vise versa) glws either way man
#7436
^ I recommend using vinegar to remove water spots from glass. Just wipe and you're done, no rubbing necessary. Then I go over it again with a damp towel so the glass doesn't smell like vinegar.
#7438
How long does it take to go 80 miles if you are driving 80 mph? Follow this link to find the most funny answer ever!
https://www.facebook.com/photo.php?v...type=2&theater
https://www.facebook.com/photo.php?v...type=2&theater
#7439
saw this at.....Tokyo Auto Salon 2013 (Tokyo, Japan): Part 2 | Canibeat....and I also washed my taffeta
_
_
_
_