What did you do to your GE fit today?
#7042
finally figured out how to install the modulo led kit. had to use the crz instructions from collegehills and find the appropriate 8 pin plug in the fuse holder. good thing it was the same blue/pink plug found in many threads here. had to lengthen the left side connector since i believe they sent me two right sides, but the shape is the same, so i can put them on either side.
Do the rear ones light up too?
#7044
Here's the pic of the recent HID projector install and custom fabricated 2" receiver hitch I welded up this weekend. The hitch is great and doesn't hang down below the bumper like the aftermarket units .
#7045
Gotcha.
Did you happen to price the Modulo LED side skirts? Been wanting those, but the price has kept me away. $$$$ for just side skirts? I can't justify it.
I saw a replica set on ebay about a year or more ago which were basically the same styling like the JDM/Modulo one's you got, but both front and rear lit up.
These right here:
Been looking for those for a while, haven't seen them since.
Looks very nice & clean.
Did you happen to price the Modulo LED side skirts? Been wanting those, but the price has kept me away. $$$$ for just side skirts? I can't justify it.
I saw a replica set on ebay about a year or more ago which were basically the same styling like the JDM/Modulo one's you got, but both front and rear lit up.
These right here:
Been looking for those for a while, haven't seen them since.
Looks very nice & clean.
#7047
Gotcha.
Did you happen to price the Modulo LED side skirts? Been wanting those, but the price has kept me away. $$$$ for just side skirts? I can't justify it.
I saw a replica set on ebay about a year or more ago which were basically the same styling like the JDM/Modulo one's you got, but both front and rear lit up.
These right here:
Been looking for those for a while, haven't seen them since.
Did you happen to price the Modulo LED side skirts? Been wanting those, but the price has kept me away. $$$$ for just side skirts? I can't justify it.
I saw a replica set on ebay about a year or more ago which were basically the same styling like the JDM/Modulo one's you got, but both front and rear lit up.
These right here:
Been looking for those for a while, haven't seen them since.
As far as the LED sideskirts, I didn't bother looking for them in Hong Kong, however I've seen em for sale in Rakuten (~$750)
#7048
Got a carwash today. Bought some goo gone and cleaned up adhesive residue i left from the plastic cover on the led door sills. Installed the 3d Red Carbon Fiber Steering Wheel insert. Had to snip off some from the side inserts since they were too long. I think i bought the version for a Honda Freed. Oh well, not too noticeable and damn that red looks damn nice.
#7049
If that style (both F&R lit) was available from Honda I'd gladly pay $$$ to get them, especially for their OEM-ness & the OEM connectors.
I'm not a big fan off replica's/knock offs.
They replica's I posted a pic of were ~$50 iirc, but it was a new seller with no feedback, and they never replied to my question(s). So I decided to opt on the safe side. Never seen them listed again
I got a price from some one else for them at almost $200 for the knock-offs, not worth it to me.
Yeah, saw that too a few weeks ago when I read Item's posts. A little cheaper than japanparts, but still a lot just for side skirts... might do what some GD guys did with the custom "welcome lights" on the OEM skirts.
I'm not a big fan off replica's/knock offs.
They replica's I posted a pic of were ~$50 iirc, but it was a new seller with no feedback, and they never replied to my question(s). So I decided to opt on the safe side. Never seen them listed again
I got a price from some one else for them at almost $200 for the knock-offs, not worth it to me.
Yeah, saw that too a few weeks ago when I read Item's posts. A little cheaper than japanparts, but still a lot just for side skirts... might do what some GD guys did with the custom "welcome lights" on the OEM skirts.
#7050
Sidewall damage $136 (installed) for 1 new crappy OEM dunlop tire.
#7051
when I got my bubble in my OEM tire... that's when I said "fuck it."
ordered a new set of wheels (Enkei 16x7 +43), new set of tires (Continental DWS 205/50/16), added TPMS and had Tirerack do the mounting and balancing for it. that way, when they arrived, I just popped them on my Fit.
Sure, it costs a LOT more than one tire... but I feel much better about it.
plus, if I get a flat, I can swap to one of the remaining 3 OEM tires without having to ride on the donut for long. I kept the OE set.
ordered a new set of wheels (Enkei 16x7 +43), new set of tires (Continental DWS 205/50/16), added TPMS and had Tirerack do the mounting and balancing for it. that way, when they arrived, I just popped them on my Fit.
Sure, it costs a LOT more than one tire... but I feel much better about it.
plus, if I get a flat, I can swap to one of the remaining 3 OEM tires without having to ride on the donut for long. I kept the OE set.
#7052
nothing new for now but did a mini shoot before she hibernates for winter more pics here... "mini FIT shoot"
#7053
Couple of pics of the Red CF steering wheel insert
And I cannot get enough of my new tails.
edit: derp just noticed the right side is peeling i need to go press it down when i go smoke later.
And I cannot get enough of my new tails.
edit: derp just noticed the right side is peeling i need to go press it down when i go smoke later.
#7055
And why the RS emblem?
#7056
Yeah, those aren't going to stay on. Especially because the surface they're adhered to is textured. If you want a new steering wheel emblem look, this is the ONLY way to go - GrafiXpressions - Express yourself in vinyl form!....
And why the RS emblem?
And why the RS emblem?
#7059
yo ryu, you bought those tails here in PH? or in HK? anyway nice tails!
also noticed that you are using an aftermarket HU? is that pioneer? if yes, how did you work it with your steering wheel audio controls?
Thanks!
also noticed that you are using an aftermarket HU? is that pioneer? if yes, how did you work it with your steering wheel audio controls?
Thanks!
#7060
as far as the head unit, its a pioneer avh-8400bh. i used the axxess aswc to wire up.
Axxess ASWC Steering wheel control interface connects your car's steering wheel audio controls to an aftermarket stereo at Crutchfield.com
Had to splice in two wires behind the vehicle harness for the steering wheel controls.