09 Fit winter front windshield ice problems
#1
09 Fit winter front windshield ice problems
I have a new '09 Fit. I am in Southern Maine. We just had our first real snow. I love the Fit, but found I was having a serious problem.
It was snowing hard and fairly cold. Cold enough to be all powder snow, with no ice. I had the car all warmed up and the defrost on high. But I couldn't keep the central and upper part of the windshield clear of ice buildup, mostly on the driver's side.
It seemed like the combination of the water accumulating on the bottom of the windshield and the wipers, and that the upper part of the windshield wasn't getting warm enough, that was causing the problem. The large driver's side wiper also seem to be a problem.
Any suggestions from people who are using the car in northern snow belt areas and Canada? Are there any adjustments possible to the vents that hit the front windshield? (There are obviously side vents, but these don't direct air on the windshield.) Is there any sort of de-icer I could use instead of windshield washer fluid?
Thanks!
It was snowing hard and fairly cold. Cold enough to be all powder snow, with no ice. I had the car all warmed up and the defrost on high. But I couldn't keep the central and upper part of the windshield clear of ice buildup, mostly on the driver's side.
It seemed like the combination of the water accumulating on the bottom of the windshield and the wipers, and that the upper part of the windshield wasn't getting warm enough, that was causing the problem. The large driver's side wiper also seem to be a problem.
Any suggestions from people who are using the car in northern snow belt areas and Canada? Are there any adjustments possible to the vents that hit the front windshield? (There are obviously side vents, but these don't direct air on the windshield.) Is there any sort of de-icer I could use instead of windshield washer fluid?
Thanks!
#2
Hmm...do you have AC turned on? If you don't that might help so that it gets rid of the moisture. I have found that my front windshield will fog up quite easily if I turn the vents away from defrost for too long, so I'd recommend keeping it there. We're currently close to -30 C and I haven't really noticed any fogging on the front windshields when i'm in defrost mode.
#3
Use 8 ounces of denatured alcohol in a fresh fill-up of regular windshield washer solvent. It is available from Ace Hardware stores and Home Depot. That will prevent freezing of your washer solvent, and prevent ice buildup on the glass.
#4
I just got this stuff put on CrystalFusion (this link is to 4 videos). So far it seems to work pretty well. I was out earlier today (in mn, getting nailed with snow) and I didn't have any problems with buildup on my windscreen, even on the highway. A freind had this stuff put on a couple of years ago, still works. I had it put on at a professional detailer shop I've used in the past for the 3m invisishield stuff.
Another option is Rain-X versus PPG Aquapel: Grudge Match - Autoblog Another friend uses this, not permanent, but lasts longer then rainx. I'm ordering some to put on my mirrors, and back window.
Another option is Rain-X versus PPG Aquapel: Grudge Match - Autoblog Another friend uses this, not permanent, but lasts longer then rainx. I'm ordering some to put on my mirrors, and back window.
#5
Member
iTrader: (2)
Join Date: Mar 2007
Location: Winthrop Harbor Illinois/ Presque Isle Wisconsin
Posts: 1,251
I just got this stuff put on CrystalFusion (this link is to 4 videos). So far it seems to work pretty well. I was out earlier today (in mn, getting nailed with snow) and I didn't have any problems with buildup on my windscreen, even on the highway. A freind had this stuff put on a couple of years ago, still works. I had it put on at a professional detailer shop I've used in the past for the 3m invisishield stuff.
Another option is Rain-X versus PPG Aquapel: Grudge Match - Autoblog Another friend uses this, not permanent, but lasts longer then rainx. I'm ordering some to put on my mirrors, and back window.
Another option is Rain-X versus PPG Aquapel: Grudge Match - Autoblog Another friend uses this, not permanent, but lasts longer then rainx. I'm ordering some to put on my mirrors, and back window.
can it be applied yourself?
Thanks
#6
I don't know about California? But, they do sell winter washer/de-icing fluid in my part of the country. There is no need to go through all that trouble.
#7
I have a new '09 Fit. I am in Southern Maine. We just had our first real snow. I love the Fit, but found I was having a serious problem.
It was snowing hard and fairly cold. Cold enough to be all powder snow, with no ice. I had the car all warmed up and the defrost on high. But I couldn't keep the central and upper part of the windshield clear of ice buildup, mostly on the driver's side.
It seemed like the combination of the water accumulating on the bottom of the windshield and the wipers, and that the upper part of the windshield wasn't getting warm enough, that was causing the problem. The large driver's side wiper also seem to be a problem.
Any suggestions from people who are using the car in northern snow belt areas and Canada? Are there any adjustments possible to the vents that hit the front windshield? (There are obviously side vents, but these don't direct air on the windshield.) Is there any sort of de-icer I could use instead of windshield washer fluid?
Thanks!
It was snowing hard and fairly cold. Cold enough to be all powder snow, with no ice. I had the car all warmed up and the defrost on high. But I couldn't keep the central and upper part of the windshield clear of ice buildup, mostly on the driver's side.
It seemed like the combination of the water accumulating on the bottom of the windshield and the wipers, and that the upper part of the windshield wasn't getting warm enough, that was causing the problem. The large driver's side wiper also seem to be a problem.
Any suggestions from people who are using the car in northern snow belt areas and Canada? Are there any adjustments possible to the vents that hit the front windshield? (There are obviously side vents, but these don't direct air on the windshield.) Is there any sort of de-icer I could use instead of windshield washer fluid?
Thanks!
Prestone :: Products : Windshield Washer Fluids
#9
I just bought some washer fluid that has de-icer in it. However, I am having problems with the side windows in the back icing up and my daughter noticed that the cold air is coming in through arm rests on the doors. I am like what the heck! Any suggestions on how to keep ALL the windows from icing up or what not????
#10
Rain-x de-icer vs Prestone?
Thanks for the feedback. I did call the service dept and found out about the washer fluid de-icers.
I had to get some de-icing additive as my washer fluid tank was full of regular fluid. Once that's gone I'll switch to de-icing fluid.
Both Prestone and Rain-X make a de-icer product. Any one have a preference?
Thanks!
I had to get some de-icing additive as my washer fluid tank was full of regular fluid. Once that's gone I'll switch to de-icing fluid.
Both Prestone and Rain-X make a de-icer product. Any one have a preference?
Thanks!
#11
Funny you mentioned this because I just experienced this today on my drive to work. I live in Boston and we are getting hit hard with a storm as I type this. The top half of my windshield was frozen with water molecules and the bottom part was fine. I had to turn up the dial to 2 and that solved my problem. I might look into the Aquapel though
#12
I wonder if the fact that the AC is on in defrost mode could add to this problem. It might blow hotter without the AC. See the thread about disabling it: https://www.fitfreak.net/forums/2nd-...c-defrost.html
#13
confused about AC disable on '09
Virtual,
After reading the thread on disabling the automatic AC when in defrost, I'm a bit confused.
Does the ignition/button method that umop-apisdn offered work on the '09 Fit? I have a USA model, if that matters.
Or do I need to go the route of unplugging the switch?
Also, If I disable the auto AC with the ignition/button method is there a way to revert back to the factory setting?
Thanks, Arne
After reading the thread on disabling the automatic AC when in defrost, I'm a bit confused.
Does the ignition/button method that umop-apisdn offered work on the '09 Fit? I have a USA model, if that matters.
Or do I need to go the route of unplugging the switch?
Also, If I disable the auto AC with the ignition/button method is there a way to revert back to the factory setting?
Thanks, Arne
#14
Virtual,
After reading the thread on disabling the automatic AC when in defrost, I'm a bit confused.
Does the ignition/button method that umop-apisdn offered work on the '09 Fit? I have a USA model, if that matters.
Or do I need to go the route of unplugging the switch?
Also, If I disable the auto AC with the ignition/button method is there a way to revert back to the factory setting?
Thanks, Arne
After reading the thread on disabling the automatic AC when in defrost, I'm a bit confused.
Does the ignition/button method that umop-apisdn offered work on the '09 Fit? I have a USA model, if that matters.
Or do I need to go the route of unplugging the switch?
Also, If I disable the auto AC with the ignition/button method is there a way to revert back to the factory setting?
Thanks, Arne
The unplugging method is the only way.
#15
As far as the aquapel, another friend uses it. I can't find it local, so will probably order online.
#16
?????
Is denatured alcohol bad for the paint or hard on the cars reservoir/pee'ers?
#17
Not at all. I have used this method to improve cleaning of the glass and prevent freezing for over 20 years.
#19
I PM'd you. Just got back from out of town.
#20
Got a Bosch Icon wiper for the driver's side (AFAIK, they don't make one short enough for the passenger's side). I've used these before; they combine an anti-lift airfoil, GREAT wiping, and they act like a winter wiper, with no external bars to collect ice/snow.
As regards the A/C compressor running and making the defrost air less hot, the normal design practice is to not run the compressor below say, 25*.
I don't know if the Honda works this way or not.
It won't matter for the outside ice, but those experiencing inside fogging, make sure the lever is not set for recirculation. If you already knew that, I do apologize.
Moon
ETA-
Some types of snow, or snow falling very hard, are beyond the ability of any defroster to defeat.
M
As regards the A/C compressor running and making the defrost air less hot, the normal design practice is to not run the compressor below say, 25*.
I don't know if the Honda works this way or not.
It won't matter for the outside ice, but those experiencing inside fogging, make sure the lever is not set for recirculation. If you already knew that, I do apologize.
Moon
ETA-
Some types of snow, or snow falling very hard, are beyond the ability of any defroster to defeat.
M
Last edited by halfmoonclip; 12-28-2008 at 09:36 PM.