Auto Dimming Rear View Mirror
#2
Check this thread ---> https://www.fitfreak.net/forums/2nd-...placement.html
I think I also read a different thread where the person used an Acura part also, but I cant find that thread.
I think I also read a different thread where the person used an Acura part also, but I cant find that thread.
#3
My other vehicle has an autodim rearview mirror. My '09 fit has autodim, also. It's called Formula One Pinnacle 35% tint on the rear glass.
#5
I have three of these (Fit, Forester, and Xterra), like them, recommend them. You can pick with or without compass, thermometer, and map lights. On a Fit you must glue a wedge to the windshield. Cipa DUAL-DISPLAY AUTO DIMMING MIRRORS : JC Whitney: Auto Parts & Accessories
Last edited by spreadhead; 11-01-2008 at 08:42 PM.
#7
I was told that there is an adapter to connect the Gentronics mirror to the stock honda mirror base. I haven t ordered it yet, but I'm still waiting for my Fit. I have one on my MDX and don't think I could to back to flicking the mirror. Also I want the Homelink instead of the garage door openers.
#10
you have to splice it in yourself. most likely to the map lights.
#11
i was talking about this
http://www.collegehillshonda.com/ins...ightmirror.pdf
i wonder if the wiring harness works with the fit?
http://www.collegehillshonda.com/ins...ightmirror.pdf
i wonder if the wiring harness works with the fit?
#12
i was talking about this
http://www.collegehillshonda.com/ins...ightmirror.pdf
i wonder if the wiring harness works with the fit?
http://www.collegehillshonda.com/ins...ightmirror.pdf
i wonder if the wiring harness works with the fit?
The cabling routing will be very similar. I noticed many later Honda models have that 8 pin standard connector at the fuse panel which is often unused in the manuals and that connector seems to be designed for adding many accessories b/c that's where they connect in via a factory harnesses.
For these mirrors, that 8-ping plugs in w/ no problem. The rub is the 2nd connector in the harness depends on which mirror / harness / connector you need. I've seen 2 models, 1 for the CR-Z which has a 2nd connector as a 12 pin and the other for the Insight which has a 13 pin 2nd connector.
My 2010 Fit has the 13 pin 2nd connector.
That 2nd connection is so the mirror can get the +12 signal when the Auto is in reverse and "un-dim" the mirror automatically. You can plug in the 8 Pin w/o the 2nd connector but you get no backup un-dimming.
Bottom line, if you check your fuse panel for that 8-pin and verify that you have a 13-pin 2nd connector (see those instructions) then the "Insight Mirror" harness / kit should work. I cannot verify this 100% b/c I do not have the Insight Kit but from the instructions, it calls out the 13 pin connector.
Cheers.
#15
Here's what I installed: Amazon.com: Gentex GENK21A Auto Dimming Mirror W/compass Temperature: Automotive
It's a great OEM quality mirror and the auto dim works flawlessly plus you get outside air temp. Gentex actually supplies OEM mirrors to car mfg's.
Install is quite simple, hers a good guide: https://www.fitfreak.net/forums/fit-...-homelink.html
The 21A has a temp sensor that I mounted behind the front license plate. Trick was running that back inside the cabin. I came in along the inside of the right quarter panel, from inside the engine bay, to the drivers door jamb then in through the connections from the side view mirror. Fish a stiff wire from inside the engine bay towards the door and you find it's a clear path.
K_C_
It's a great OEM quality mirror and the auto dim works flawlessly plus you get outside air temp. Gentex actually supplies OEM mirrors to car mfg's.
Install is quite simple, hers a good guide: https://www.fitfreak.net/forums/fit-...-homelink.html
The 21A has a temp sensor that I mounted behind the front license plate. Trick was running that back inside the cabin. I came in along the inside of the right quarter panel, from inside the engine bay, to the drivers door jamb then in through the connections from the side view mirror. Fish a stiff wire from inside the engine bay towards the door and you find it's a clear path.
K_C_
#16
Bottom line, if you check your fuse panel for that 8-pin and verify that you have a 13-pin 2nd connector (see those instructions) then the "Insight Mirror" harness / kit should work. I cannot verify this 100% b/c I do not have the Insight Kit but from the instructions, it calls out the 13 pin connector.
but then I thought of this
Still undecided if I want to get the Honda auto-dimming, or just keep doing it manually and getting the spoon mirror cover (great reviews).
#19
Amazon.com: Gentex GENK21A Auto Dimming Mirror W/compass Temperature: Automotive
This one is the closest one to mine. Mine also has map light that are no longer offered.
This one is the closest one to mine. Mine also has map light that are no longer offered.
Last edited by Jodele; 01-20-2012 at 02:04 PM.