Unlock my doors, please!
#84
10-31-2008, 02:48 AM
I think the reason for unlocking just the driver door is for when you are alone in the car at night. Otherwise, others can easily gain access to your car and cause you harm.
#86
10-31-2008, 02:05 PM
- Insert key and turn forward 2 clicks (don't turn engine on).
- Press and hold the door lock button to its "unlock" position.
- After 5 seconds you'll hear a click. DON'T LET GO YET! Wait another 5 seconds until you hear another click, then immediately pull the key out.
- Press and hold the door lock button to its "unlock" position.
- After 5 seconds you'll hear a click. DON'T LET GO YET! Wait another 5 seconds until you hear another click, then immediately pull the key out.
#87
11-01-2008, 08:27 PM
This is from memory, so forgive me if this doesn't work:
- Insert key and turn forward 2 clicks (don't turn engine on).
- Press and hold the door lock button to its "unlock" position.
- After 5 seconds you'll hear a click. DON'T LET GO YET! Wait another 5 seconds until you hear another click.
You're done.
Hope that works.
- Insert key and turn forward 2 clicks (don't turn engine on).
- Press and hold the door lock button to its "unlock" position.
- After 5 seconds you'll hear a click. DON'T LET GO YET! Wait another 5 seconds until you hear another click.
You're done.
Hope that works.
Might be my best mod yet - I was getting really sick of having to push the unlock button on my remote every morning when I had to retrieve things from the back seat at daycare and then at work.
Woo-hoo!
#88
11-01-2008, 09:06 PM
How about using your remote to unlock all 4 doors at once instead of the traditional way press once to unlock the driver door and press "unlock" again to unlock the other 3 doors. Basically you have to press twice on the "unlock" button to open all doors instead of a single press of the unlock button. Is this possible? and also like in a hot summer days and you want to crack open the windows, on my TSX you press the "unlock" button and hold it for 5sec and all windows roll down.
#89
11-09-2008, 11:19 AM
This is from memory, so forgive me if this doesn't work:
- Insert key and turn forward 2 clicks (don't turn engine on).
- Press and hold the door lock button to its "unlock" position.
- After 5 seconds you'll hear a click. DON'T LET GO YET! Wait another 5 seconds until you hear another click.
You're done.
Hope that works.
- Insert key and turn forward 2 clicks (don't turn engine on).
- Press and hold the door lock button to its "unlock" position.
- After 5 seconds you'll hear a click. DON'T LET GO YET! Wait another 5 seconds until you hear another click.
You're done.
Hope that works.
#90
11-09-2008, 11:21 AM
How about using your remote to unlock all 4 doors at once instead of the traditional way press once to unlock the driver door and press "unlock" again to unlock the other 3 doors. Basically you have to press twice on the "unlock" button to open all doors instead of a single press of the unlock button. Is this possible? and also like in a hot summer days and you want to crack open the windows, on my TSX you press the "unlock" button and hold it for 5sec and all windows roll down.
#91
11-10-2008, 02:52 PM
Chalk up another satisfied customer. I was just telling my wife last night that I'd looked in the manual and I couldn't get the Fit to unlock all the doors when shifting into park, sorry. Found this posting today, worked like a charm. Gotta love the 'net.
#94
11-10-2008, 11:03 PM
what I did on my 09 MT sport
insert key in ignition
turn twice to on position
hold the master lock button down, this will give it a click which is actually the doors unlocking. It clicked once, and then again, so technically its 3 clicks.
pulled key out.
all with the e brake on, although I'm not sure if that matters, but just wanted to be accurate.
hope this helps.
insert key in ignition
turn twice to on position
hold the master lock button down, this will give it a click which is actually the doors unlocking. It clicked once, and then again, so technically its 3 clicks.
pulled key out.
all with the e brake on, although I'm not sure if that matters, but just wanted to be accurate.
hope this helps.
#95
11-11-2008, 08:45 AM
I have tried this several times in my MT and have yet to get it to work. For everyone else who has gotten it to work and for the sake of
consistency, did you have it in 1st gear, neutral or what? And with the e-brake? This is driving me crazy!
consistency, did you have it in 1st gear, neutral or what? And with the e-brake? This is driving me crazy!
#97
12-02-2008, 02:43 AM
This is from memory, so forgive me if this doesn't work:
- Insert key and turn forward 2 clicks (don't turn engine on).
- Press and hold the door lock button to its "unlock" position.
- After 5 seconds you'll hear a click. DON'T LET GO YET! Wait another 5 seconds until you hear another click.
You're done.
Hope that works.
- Insert key and turn forward 2 clicks (don't turn engine on).
- Press and hold the door lock button to its "unlock" position.
- After 5 seconds you'll hear a click. DON'T LET GO YET! Wait another 5 seconds until you hear another click.
You're done.
Hope that works.
Thanks.
#98
12-02-2008, 12:09 PM
Many here have been where you are, many attempts and no go. But you have to read the procedure CAREFULLY. Then it will work. Remember to pull the key out immediately after you hear the 2nd click. (does not include the locks unlocking click)
#100
12-03-2008, 12:17 AM
just wondering after this is set, do the doors automaticaly lock themselves when you turn the engine on once you're inside the car? My concern and something i haven't been doing is warming up the car while i brush off the snow off the car/windows because I am worried that the doors will automatically lock themselves. and make this sticky please moderators