I am trying to run a backup camera video cable to the front. I got the cable from the lic plate to the drivers side backup light where I got power and ground for the camera. Tryin to now get cable to the front. Do all the interior panels just pop off? Any special sequence to removing them?

 

I ran my cables to the front through the bottom. You can lift the panels on the bottom. When you get to the B pillar, you can just fish it behind there.

 

Got it done pulled back panel out enough to get cable to rear door then ran cable under panel to front. In and working. Mounted the mic on the steering wheel panel. Voice goes our loud and clear.

Next project install KYB strut assemble front and KYB shocks in rear. Having a retired Honda mechanic do it he is also adjusting valves and changing spark plugs and taking it to local Honda dealer for alignment. I buy parts pay him $600. Parts were $380. Under $1,000 a lot less than the local repair shop quote of $1,700.