2nd Generation (GE 08-13) 2nd Generation specific talk and questions here.

Nipple size for front and rear brake bleeder valve?

Thread Tools
 
Search this Thread
 
  #1  
Old 08-08-2020, 07:27 PM
StGemma's Avatar
Member
Thread Starter
Join Date: Jul 2020
Location: America
Posts: 124
Nipple size for front and rear brake bleeder valve?

Hola,

Does anyone know what the nipple size is for the front and rear brake bleeder valve? I want to get a bleeder valve kit with the hose and pump, so, as most of you folks know, having the correct hose size to fit very firmly on the valve will be crucial.

Thanks.
 

Last edited by StGemma; 08-08-2020 at 07:41 PM.
  #2  
Old 08-08-2020, 08:16 PM
SiXiam's Avatar
Member
5 Year Member
Join Date: Aug 2010
Location: Pittsburgh, PA
Posts: 241
I'm not sure. I used this for mine:
Amazon Amazon

Be warned some of your bleeder valves may be really hard to turn. I barely got my rear one tightened and bought a replacement in case I ever have to mess with it again.
 
  #3  
Old 08-08-2020, 09:05 PM
StGemma's Avatar
Member
Thread Starter
Join Date: Jul 2020
Location: America
Posts: 124
Thank you for the response. Yeah, I purchased an 8mm and 10mm flare nut wrench, so hopefully that will be sufficient.

I've never bled the brakes for my Honda Fit, so I was also wondering how many ounces will I need to replace for all four brakes, and where may I take the old brake fluid to dispose of? Does Walmart accept brake fluid?

Thank you.
 

Last edited by StGemma; 08-08-2020 at 09:25 PM.
  #4  
Old 08-08-2020, 09:44 PM
SiXiam's Avatar
Member
5 Year Member
Join Date: Aug 2010
Location: Pittsburgh, PA
Posts: 241
Most auto parts store take old fluid. I don't know it by ounces. I had a large bottle of brake fluid and a normal size one and only used the large one.
One technique that is helpful is get one of those baby nasal aspirators to drain the fluid out of the reservoir, before putting new stuff in. You can't get it all, but it saves you some time. Some people do this routinely, like every year without bleeding.
 
  #5  
Old 08-08-2020, 10:52 PM
StGemma's Avatar
Member
Thread Starter
Join Date: Jul 2020
Location: America
Posts: 124
Oh, good to know! I'll have to ask AutoZone, or something. Do you remember what size the large bottle was in milliliters, grams, lbs, etcetera?

Just wondering: why remove the brake fluid from the reservoir? I've heard and read the service manual, and others, say to not let the brake fluid go below the minimum, because that is a risk of letting air in.

Also, does anyone know what size Speed Bleeder that will fit for the 2012 Fit, and which brand is good? Would be nice to install those.
Edit: Awesome, found this thread, which answers my third question. https://www.fitfreak.net/forums/2nd-...rew-sizes.html
 

Last edited by StGemma; 08-10-2020 at 05:00 AM.
  #6  
Old 08-10-2020, 07:28 PM
SiXiam's Avatar
Member
5 Year Member
Join Date: Aug 2010
Location: Pittsburgh, PA
Posts: 241
Originally Posted by StGemma
Oh, good to know! I'll have to ask AutoZone, or something. Do you remember what size the large bottle was in milliliters, grams, lbs, etcetera?

Just wondering: why remove the brake fluid from the reservoir? I've heard and read the service manual, and others, say to not let the brake fluid go below the minimum, because that is a risk of letting air in.

Also, does anyone know what size Speed Bleeder that will fit for the 2012 Fit, and which brand is good? Would be nice to install those.
Edit: Awesome, found this thread, which answers my third question. https://www.fitfreak.net/forums/2nd-...rew-sizes.html
I think Prestone 12 oz and 32 oz. I answered the other part about the saving time and doing it routinely.
 
  #7  
Old 08-11-2020, 08:42 PM
StGemma's Avatar
Member
Thread Starter
Join Date: Jul 2020
Location: America
Posts: 124
Ah, gotchya. You did say that. Great, thanks for the information.

I actually went to the Honda dealership today and it was only about $7 for the brake fluid for a 12 ounce bottle. Not too bad.
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
ddson33
2nd Generation GE8 Specific DIY: Repair & Maintenance Sub-Forum
2
05-31-2020 02:44 PM
mtrexler
2nd Generation (GE 08-13)
11
06-26-2019 05:58 AM
amberd03
3rd Generation (2015+)
2
08-20-2017 11:57 AM
utsug
2nd Generation (GE 08-13)
3
05-20-2016 12:03 AM
icedmocha
1st Generation (GD 01-08)
1
02-09-2015 05:58 PM



Quick Reply: Nipple size for front and rear brake bleeder valve?



All times are GMT -4. The time now is 03:33 AM.