Steering wheel turn right so the car go straight forward, what's happening?
#1
Steering wheel turn right so the car go straight forward, what's happening?
This the my situation with JAZZ GE6 2008.
1.) I have to turn my steering wheel to the right so that the car can go straight forward.
2.) At the car is rest, and when I return the steering wheel to centre, the 2 front wheels both almost 0 camber angle.
3.) The rear right wheel has positive camber angle. The rear left wheel has 0 camber angle.
4.) A little bent on the rear torsion beam.
Can these be the factors in this situation??
What I can do to fix this problem?
Should I replace the rear torsion beam?
Thanks!
1.) I have to turn my steering wheel to the right so that the car can go straight forward.
2.) At the car is rest, and when I return the steering wheel to centre, the 2 front wheels both almost 0 camber angle.
3.) The rear right wheel has positive camber angle. The rear left wheel has 0 camber angle.
4.) A little bent on the rear torsion beam.
Can these be the factors in this situation??
What I can do to fix this problem?
Should I replace the rear torsion beam?
Thanks!
#2
Do you have more info on how your car got into the condition it's in? Was it in an accident? Did you drive up over something?
As far as the rear of the car goes. Are the wheels bent? If not, it's a safe guess that you should replace the rear i-beam with a known good replacement that isn't bent too. We need more info about the front steering. It sounds like there's problems either with the steering rack or at least the tie rod ends. More info would really help.
As far as the rear of the car goes. Are the wheels bent? If not, it's a safe guess that you should replace the rear i-beam with a known good replacement that isn't bent too. We need more info about the front steering. It sounds like there's problems either with the steering rack or at least the tie rod ends. More info would really help.
Thread
Thread Starter
Forum
Replies
Last Post
robertjazz
2nd Generation (GE 08-13)
0
06-29-2019 06:52 AM
cr4zy3lgato
1st Generation (GD 01-08)
6
11-16-2010 06:09 PM