What did you do to the GD Fit today?
#6901
03-25-2014, 08:40 PM
That is so the level I wish I could be at right now. I tell myself the last thing I need is HONDATA and the car is done.
#6903
03-26-2014, 02:51 PM
Hi 
new to the forum. Got a 2005 GD automatic. So far i just had my car cleaned, change oil, change filter and had it tuned up. At the moment my jazz is all stock but will save up for a few upgrades soon
new to the forum. Got a 2005 GD automatic. So far i just had my car cleaned, change oil, change filter and had it tuned up. At the moment my jazz is all stock but will save up for a few upgrades soon
#6904
03-26-2014, 03:43 PM
#6905
03-27-2014, 05:20 PM
Fit died while at a stop light, shuddered and didn't go above 35 mph without shaking even more.
I guess I'll stop postponing that coil pack order, lol.
Pro tip: don't buy aftermarket coils!
I guess I'll stop postponing that coil pack order, lol.
Pro tip: don't buy aftermarket coils!
#6906
03-28-2014, 01:35 PM
#6908
03-30-2014, 04:24 PM
I Installed replica OEM fog lights on a base model GD3. Kept them black as well. Add some contrast. Need to clean my car then will post pics.
#6911
03-31-2014, 09:55 PM
Yellow Fog lights, black fog light housing, color matched eyelids, new rims and tires (Enkei GF-1 powder coated hyper black 17x7 +42 with Falken 205/40 17), rear garnish, and Osram night breakers on the way. My carbon wing would be on if I could figure out how to install the damn thing! Things to be added before the end of April - Air Suspension, White face gauges, semi air horn, EP3 axleback, JDM visors, Carbon wing, and carbon steering wheel inserts.
Last edited by 2poler; 04-01-2014 at 10:11 PM.
#6912
03-31-2014, 10:17 PM
#6914
03-31-2014, 10:34 PM
Yellow Fog lights, black fog light housing, color matched eyelids, new rims and tires (Enkei GF-1 powder coated hyper black 17x7 +42 with Falken 205/40 17), rear garnish, and Osram night breakers on the way. My carbon wing would be on if I could figure out how to install the damn thing! Things to be added before the end of April - Air Suspension, White face gauges, semi air horn, EP3 axleback, JDM visors, Carbon wing, and carbon steering wheel inserts. * not sure why Flickr is not embedding pictures now?
https://www.flickr.com/photos/36894424@N06/13550859565/
https://www.flickr.com/photos/368944...n/photostream/
https://www.flickr.com/photos/368944...n/photostream/
https://www.flickr.com/photos/368944...n/photostream/
https://www.flickr.com/photos/36894424@N06/13550859565/
https://www.flickr.com/photos/368944...n/photostream/
https://www.flickr.com/photos/368944...n/photostream/
https://www.flickr.com/photos/368944...n/photostream/
#6915
03-31-2014, 10:35 PM
That was from the bolt end of the linkage. That's the inner shoulder tread.
The pressure was strong that the linkage snapped causing the coilover to loosen from the bottom perch. This rotated the coilover making the bolt end go into the tire. Happened on the way back to the track. So 4 runs plus the drive home at 80mph rubbing. Lame!
The pressure was strong that the linkage snapped causing the coilover to loosen from the bottom perch. This rotated the coilover making the bolt end go into the tire. Happened on the way back to the track. So 4 runs plus the drive home at 80mph rubbing. Lame!
#6916
03-31-2014, 10:41 PM
I put some IK20's in a few weeks ago replacing the OE long life Iridium to the power Iridium. The car feels smoother but no that I just bought my hondata I'm wondering if it will cause any issues.
#6917
03-31-2014, 11:20 PM
That was from the bolt end of the linkage. That's the inner shoulder tread.
The pressure was strong that the linkage snapped causing the coilover to loosen from the bottom perch. This rotated the coilover making the bolt end go into the tire. Happened on the way back to the track. So 4 runs plus the drive home at 80mph rubbing. Lame!
The pressure was strong that the linkage snapped causing the coilover to loosen from the bottom perch. This rotated the coilover making the bolt end go into the tire. Happened on the way back to the track. So 4 runs plus the drive home at 80mph rubbing. Lame!
#6918
03-31-2014, 11:35 PM
Oh yes so did I but I got lazy. I really should have dial in things a bit better. I have one stock and one k Sport one in. It's luck I did because I had the K Sport one to low. So it actually rubbed on the axle here and there. So when I replaced it yesterday I measured it to the other side. So it made some horrible noises last night and a little today. So I dialed it today and it I can feel the difference. Lesson learned. Take the extra time to dial your shit in like a pro.
#6919
04-01-2014, 12:13 AM
Spread out over the past month but:
Depo smoked LED tails, Odyssey/homelink/sunglass holder front map light, JDM wiper mod, 06+ civic SI black w/ red stitching boot, interior LED bulbs for the front, center and trunk, JDM power folding mirrors, and installed my freshly painted from gray-ish/tan to black JDM center console/armrest.
Over the next week or two, i'll be working on a bi-xenon retrofit.
Depo smoked LED tails, Odyssey/homelink/sunglass holder front map light, JDM wiper mod, 06+ civic SI black w/ red stitching boot, interior LED bulbs for the front, center and trunk, JDM power folding mirrors, and installed my freshly painted from gray-ish/tan to black JDM center console/armrest.
Over the next week or two, i'll be working on a bi-xenon retrofit.
#6920
04-01-2014, 01:24 AM
I jumped the gun before doing some research on the forum but do the Ik22 plugs make a but of difference?
I put some IK20's in a few weeks ago replacing the OE long life Iridium to the power Iridium. The car feels smoother but no that I just bought my hondata I'm wondering if it will cause any issues.
I put some IK20's in a few weeks ago replacing the OE long life Iridium to the power Iridium. The car feels smoother but no that I just bought my hondata I'm wondering if it will cause any issues.