What did you do to the GD Fit today?
#4241
Just hit 90K
The trouble is just starting it seems.
Pulling to the left and feathering my tires even after alignment
New battery was needed
one spark plug was leaking compression and half-melted my plug coil
now I'm getting the P2647 code
The trouble is just starting it seems.
Pulling to the left and feathering my tires even after alignment
New battery was needed
one spark plug was leaking compression and half-melted my plug coil
now I'm getting the P2647 code
#4242
speaking of problems/issues...i think my valve lash is off or something. The motor at idle kinda ticks like something is out of alignment. Not specifically sure but does anyone have the specs and walk thru of how to fix and what to set valve lash at? I wanna make sure i nip this in the bud instead of waiting till its a real problem.
#4243
speaking of problems/issues...i think my valve lash is off or something. The motor at idle kinda ticks like something is out of alignment. Not specifically sure but does anyone have the specs and walk thru of how to fix and what to set valve lash at? I wanna make sure i nip this in the bud instead of waiting till its a real problem.
Valve Clearance Adjustment (L12A/L13A)
#4244
Here you go. Did this about 2 months ago. Not difficult at all.
Valve Clearance Adjustment (L12A/L13A)
Valve Clearance Adjustment (L12A/L13A)
#4245
DIY adjusting valve clearences GD - Honda Fit Forums
Edit: Here's the FitFreak link, a more direct approach to the DIY https://www.fitfreak.net/forums/621889-post8.html
Last edited by Giggles; 10-28-2011 at 05:35 PM.
#4247
Finished the exterior! I love it and couldn't have been happier of how it turned out. My wife did an awesome job painting it. Now I just have the stereo and upholstery left and the car will be ready for the show here in az.
#4248
I had a flat on my right rear tire... I had been driving on a road over rolling terrain with fairly gentle curves at about 70MPH and had taken my foot off of the throttle when going down a hill in 5TH gear when I heard what sounded like something rubbing on the right rear fender and found the tire was flat.. The tire was still on the bead but the sidewall was badly damaged by the outer edge of the rim... I drove the last 1 1/2 mile with the right side of the car off of the road and in the grass without harming the wheel rim...
#4250
Did a shoot with her yesterday. Came out real nice. Heres the link,,,,
https://www.fitfreak.net/forums/fit-...boardwalk.html
Teaser:
.
https://www.fitfreak.net/forums/fit-...boardwalk.html
Teaser:
.
#4255
Previc93...CLEEEEAAAAAANNNNNN!!!!!!
B...as usual...amazing.
Im saving to get an 8th gen si sedan and its SOOOOOO hard not spending the $600 sitting on the dresser at home on some wheels or suspension...you have no idea...>_<
B...as usual...amazing.
Im saving to get an 8th gen si sedan and its SOOOOOO hard not spending the $600 sitting on the dresser at home on some wheels or suspension...you have no idea...>_<
#4256
Thanx for the comments guys. No centerfold is coming, but hopefully a shot in oh snaps would be great. Car is not fast enough for centerfold. Wait for the video shoot though that will blow you away.
Alot of love must be given to my photographer. He really does an amazing job with that camera of his. If you like the shots he took give him some + rep on one of those shoot threads he made for me. Or better yet hit him up to shoot yours
Alot of love must be given to my photographer. He really does an amazing job with that camera of his. If you like the shots he took give him some + rep on one of those shoot threads he made for me. Or better yet hit him up to shoot yours
#4257
King Of The Hill. Keep us informed on the shows she goes to.
#4258
Why are you typing with K's instead of c's and using numbers? From what I remember, you're a middle aged to elderly (idk which) man, are you trying to fit in or something? It just takes what little credibility you have and kills it.
/Rant.
As for today:
I drove it a 100 miles or so.
/Rant.
As for today:
I drove it a 100 miles or so.