pioneer speaker
#2
check crutchfield.com to see if it will fit. It may even tell you that it fits in the rear but not the front. At the very least Crutchfield will tell you mounting depth.
In any case though I suggest making speaker rings 1/2" to 3/4" thick and drilling them in around the stock speaker hole with self tapping screws then mounting your speakers to the rings.
Good luck.
In any case though I suggest making speaker rings 1/2" to 3/4" thick and drilling them in around the stock speaker hole with self tapping screws then mounting your speakers to the rings.
Good luck.
#3
it's hard to tell because each manufacturer has their own sizing...well, they're generally universal but the way the basket is made, etc. but with the right spacer (or just cutting out your stock speaker and using it as a spacer) might work.
#4
Yes, 6 3/4 inches will fit. The Infinitys I put in are 6 3/4, and my only problem was depth. So check to see what the depth is on the Pioneers. Anything much more than 2 inches means you'll need some spacers. I had to use 3/4 inch spacers to get mine to fit.
Thread
Thread Starter
Forum
Replies
Last Post